Contact US
How do I set the gap on the Adjustable Air Amplifiers?

To change the gap, loosen the lock ring and back out or tighten the inner sleeve until the desired gap opening is reached.  The gap can be set with shim stock to help in obtaining a more accurate setting.  After setting the gap opening to the desired dimension, tighten the lock ring to hold it in place.  Remove the shim stock from the gap (if shim stock is used).

The Adjustable Air Amplifiers receive their stock flow setting at the factory with the use of a flow meter.

Air Amplifiers
  1. Can I increase my air pressure with an Air Amplifier?
  2. Can I connect the output of a Vortex Tube to an Air Amplifier?
  3. If I am attaching duct to the Air Amplifier, how much ducting can I attach to an Air Amplifier?
  4. How is the volume of air 6" (152mm) away from the unit more than at the exit point?
  5. How do I set the gap on the Adjustable Air Amplifiers?
  6. What are the temperature limits of the Air Amplifiers?
  7. What is the difference between the Super Air Amplifier and the Adjustable Air Amplifier?
  8. What are the available materials of construction for the Air Amplifiers?
Bookmark and Share
  Follow Us
  RSS Wordpress Twitter Facebook