Contact US
 
1
.
How is the valve stem used to adjust the nozzle's liquid flow?

The Atomizing Spray Nozzles come pre-set from the factory in a fully open position.  To reduce or stop flow, turn the stem clockwise.  Be careful not to over tighten the stem as damage to the stem or liquid cap can occur.  Once completely closed, 3-4 turns counterclockwise will result in a fully open flow.

Atomizing Nozzles
  1. How is the valve stem used to adjust the nozzle's liquid flow?
  2. What fluid was used to determine the flow rates given in the catalog information?
  3. What is the maximum viscosity that can be dispensed through each type of atomizing nozzle?
  4. What is the maximum draw height a Siphon Fed Nozzle can draw from?
  5. How can I tell what Spray Nozzle I have?
  6. What is the maximum operating temperature for the Atomizing Spray Nozzles?
 
QUICK ORDER:
CART INFORMATION:
APPLICATION SEARCH:
 
 
 
 
 
Bookmark and Share
 
  Follow Us
  RSS Wordpress Twitter Facebook