Contact US
Can I mount EXAIR’s Cabinet Coolers to the side of our enclosure?

Yes, UL listed NEMA 12 models can be mounted in any orientation (horizontal, diagonal, etc…) but you can save some space by using our 90 degree mounting kit and position the Cabinet Cooler vertically. NEMA 4/4X models must be in the vertical orientation to maintain their UL listed NEMA integrity. The 90 degree mounting kits make side mount installation simple, clean and effective.

Cabinet Cooler
  1. Which Cabinet Cooler should I use?
  2. Will EXAIR Corporation Cabinet Coolers cause condensation inside our control panels?
  3. Can I mount EXAIR’s Cabinet Coolers to the side of our enclosure?
  4. How do I get the solenoid valve on the Cabinet Cooler to stop chattering?
  5. What is the Btu/Hr range of your Cabinet Coolers?
  6. What is the material of EXAIR Cabinet Coolers?
  7. How can I determine which EXAIR Cabinet Cooler® System I have?
  8. Will a Cabinet Cooler® System operate at less than 100 PSIG?
  9. Why do I need a Cold Air Distribution Kit?
  10. Why should I avoid using a non-contact temp gun (infrared heat gun) to determine my cabinet temps?
  11. Can the thermostat be adjusted to maintain an internal temperature different than the preset 95° F?
  12. What muffler do I need with my NEMA 12 Cabinet Cooler® System (mufflers are included w/ NEMA 4/4X)?
  13. What are the benefits of an ETC over the thermostat controlled Cabinet Cooler® System?
  14. What temperatures can the ETC be set to?
  15. What is the maximum operating temperature for the Cabinet Cooler System?
Bookmark and Share
  Follow Us
  RSS Wordpress Twitter Facebook