Contact US
Why do I need a Cold Air Distribution Kit?
The Cold Air Distribution Kit allows the Cabinet Cooler® System to distribute the air through the cabinet.  This is needed because the Cabinet Cooler itself is self exhausting.  This means all the air that is put into the cabinet by the unit is exhausted through the body of the unit.  In order to ensure you are allowing the cold air to properly cool the cabinet and only warm air to be exhausted, you will want to utilize the Cold Air Distribution Kit to carry the cold air away from the exhaust port. 
Cabinet Cooler
  1. Which Cabinet Cooler should I use?
  2. Will EXAIR Corporation Cabinet Coolers cause condensation inside our control panels?
  3. Can I mount EXAIR’s Cabinet Coolers to the side of our enclosure?
  4. How do I get the solenoid valve on the Cabinet Cooler to stop chattering?
  5. What is the Btu/Hr range of your Cabinet Coolers?
  6. What is the material of EXAIR Cabinet Coolers?
  7. How can I determine which EXAIR Cabinet Cooler® System I have?
  8. Will a Cabinet Cooler® System operate at less than 100 PSIG?
  9. Why do I need a Cold Air Distribution Kit?
  10. Why should I avoid using a non-contact temp gun (infrared heat gun) to determine my cabinet temps?
  11. Can the thermostat be adjusted to maintain an internal temperature different than the preset 95° F?
  12. What muffler do I need with my NEMA 12 Cabinet Cooler® System (mufflers are included w/ NEMA 4/4X)?
  13. What are the benefits of an ETC over the thermostat controlled Cabinet Cooler® System?
  14. What temperatures can the ETC be set to?
  15. What is the maximum operating temperature for the Cabinet Cooler System?
Bookmark and Share
  Follow Us
  RSS Wordpress Twitter Facebook