Contact US
 
13
.
What are the benefits of an ETC over the thermostat controlled Cabinet Cooler® System?

The ETC has the following benefits:

1.) The set-point is easily adjustable with the use of push-buttons located on the front panel of the unit.
2.) The controller maintains the set point temperature within 1 °F of the set point.
3.) The units can be changed from Fahrenheit to Celsius through push-button commands on the front panel of the unit.
4.) The ETC digital display indicates the actual temperature inside the cabinet. 

Cabinet Cooler
  1. Which Cabinet Cooler should I use?
  2. Will EXAIR Corporation Cabinet Coolers cause condensation inside our control panels?
  3. Can I mount EXAIR’s Cabinet Coolers to the side of our enclosure?
  4. How do I get the solenoid valve on the Cabinet Cooler to stop chattering?
  5. What is the Btu/Hr range of your Cabinet Coolers?
  6. What is the material of EXAIR Cabinet Coolers?
  7. How can I determine which EXAIR Cabinet Cooler® System I have?
  8. Will a Cabinet Cooler® System operate at less than 100 PSIG?
  9. Why do I need a Cold Air Distribution Kit?
  10. Why should I avoid using a non-contact temp gun (infrared heat gun) to determine my cabinet temps?
  11. Can the thermostat be adjusted to maintain an internal temperature different than the preset 95° F?
  12. What muffler do I need with my NEMA 12 Cabinet Cooler® System (mufflers are included w/ NEMA 4/4X)?
  13. What are the benefits of an ETC over the thermostat controlled Cabinet Cooler® System?
  14. What temperatures can the ETC be set to?
  15. What is the maximum operating temperature for the Cabinet Cooler System?
 
QUICK ORDER:
CART INFORMATION:
APPLICATION SEARCH:
 
 
 
 
 
Bookmark and Share
 
  Follow Us
  RSS Wordpress Twitter Facebook