Contact US
How do I mount the Super Air Wipe?
The Super Air Wipe can be mounted in a variety of ways. The most common method is to use the compressed air pipe to support them. There are NPT female threads on each half into which the compressed air supply pipe can be threaded. Position the Super Air Wipe where you want and then strap the pipe into place.  Another way to mount the Super Air Wipe would be to utilize the 1/4-20 tapped holes on the bottom of the Super Air Wipe. There is about 3/8” depth of thread to use for a bracket fabricated by the customer to be bolted to the bottom of the Super Air Wipe.
Super Air Wipes
  1. What is the angle of the airflow from the Super Air Wipe?
  2. At what pressure should I operate the Super Air Wipe?
  3. How do I mount the Super Air Wipe?
  4. What is the temperature range for the Super Air Wipe?
  5. Is the Super Air Wipe available in materials other than aluminum?
  6. Can I put cold air from a Vortex Tube into the Super Air Wipe?
  7. What is the angle the air exits the Air Wipe at?
  8. What is the recommended gap to have between the product and the Air Wipe?
Bookmark and Share
  Follow Us
  RSS Wordpress Twitter Facebook