Internal mix nozzles mix the liquid and water inside the air cap and produce the finest atomization. Internal mix nozzles can be used on liquids with a viscosity up to 300 cP. Both air and liquid sides are pressure fed.
Multiple Patterns Available
Internal mix nozzles are available in three patterns: narrow angle round pattern, wide angle round pattern and flat fan pattern. 1/4 and 1/2 NPT models available.
Narrow Angle Round Pattern - excellent for spraying a concentrated mist of liquid. They can apply a heavy coat up close or send a very fine mist over 30 feet away! Six models available. >>For More Info
Wide Angle Round Pattern - great for covering a broad area. They can be adjusted for a light mist or a heavy soaking spray. Seven models available. >>For More Info
Flat Fan Pattern - good for vertical or horizontal assembly lines. Their broad thin pattern makes efficient use of your expensive liquids. Seven models available. >>For More Info
Deflected Flat Fan Pattern - good for applications where space is at a premium. The pattern sprays at a right angle to the nozzle's orientation, allowing spray to be placed precisely where it's needed in close quarters. One model available. >>For More Info
360° Hollow Circular Pattern - good for applications where the spray pattern must be oriented away from the nozzle in all directions. 360° nozzles are ideal where a smooth, even coating is needed on the ID of pipe or similar ductwork. Two models available. >>For More Info