Model 6935-30 30' 2-1/2" ID Line Vac Hose

In stock for all hose compatible Line Vacs up to 3". This transparent conveying hose is a spiral reinforced PVC
Model
6935-30
$487.00

View More
In stock for all hose compatible Line Vacs up to 3". This transparent conveying hose is a spiral reinforced PVC material used for a variety of material transfer applications. Available in 10', 20', 30', 40' and 50' lengths. Service temperature rating is -4°F (-20°C) to 150°F (+65°C). Larger sizes in longer lengths require special shipping. Contact EXAIR for details.

Models

Model # Description
6928-10 Conveying Hose, 3/8" ID x 10' (3.1m) long
6928-20 Conveying Hose, 3/8" ID x 20' (6.1m) long
6928-30 Conveying Hose, 3/8" ID x 30' (9.1m) long
6928-40 Conveying Hose, 3/8" ID x 40' (12.2m) long
6928-50 Conveying Hose, 3/8" ID x 50' (15.2m) long
6929-10 Conveying Hose, 1/2" ID x 10' (3.1m) long
6929-20 Conveying Hose, 1/2" ID x 20' (6.1m) long
6929-30 Conveying Hose, 1/2" ID x 30' (9.1m) long
6929-40 Conveying Hose, 1/2" ID x 40' (12.2m) long
6929-50 Conveying Hose, 1/2" ID x 50' (15.2m) long
6930-10 Conveying Hose, 3/4" ID x 10' (3.1m) long
6930-20 Conveying Hose, 3/4" ID x 20' (6.1m) long
6930-30 Conveying Hose, 3/4" ID x 30' (9.1m) long
6930-40 Conveying Hose, 3/4" ID x 40' (12.2m) long
6930-50 Conveying Hose, 3/4" ID x 50' (15.2m) long
6931-10 Conveying Hose, 1" ID x 10' (3.1m) long
6931-20 Conveying Hose, 1" ID x 20' (6.1m) long
6931-30 Conveying Hose, 1" ID x 30' (9.1m) long
6931-40 Conveying Hose, 1" ID x 40' (12.2m) long
6931-50 Conveying Hose, 1" ID x 50' (15.2m) long
6932-10 Conveying Hose, 1-1/4" ID x 10' (3.1m) long
6932-20 Conveying Hose, 1-1/4" ID x 20' (6.1m) long
6932-30 Conveying Hose, 1-1/4" ID x 30' (9.1m) long
6932-40 Conveying Hose, 1-1/4" ID x 40' (12.2m) long
6932-50 Conveying Hose, 1-1/4" ID x 50' (15.2m) long
6933-10 Conveying Hose, 1-1/2" ID x 10' (3.1m) long
6933-20 Conveying Hose, 1-1/2" ID x 20' (6.1m) long
6933-30 Conveying Hose, 1-1/2" ID x 30' (9.1m) long
6933-40 Conveying Hose, 1-1/2" ID x 40' (12.2m) long
6933-50 Conveying Hose, 1-1/2" ID x 50' (15.2m) long
6934-10 Conveying Hose, 2" ID x 10' (3.1m) long
6934-20 Conveying Hose, 2" ID x 20' (6.1m) long
6934-30 Conveying Hose, 2" ID x 30' (9.1m) long
6934-40 Conveying Hose, 2" ID x 40' (12.2m) long
6934-50 Conveying Hose, 2" ID x 50' (15.2m) long
6935-10 Conveying Hose, 2-1/2" ID x 10' (3.1m) long
6935-20 Conveying Hose, 2-1/2" ID x 20' (6.1m) long
6935-30 Conveying Hose, 2-1/2" ID x 30' (9.1m) long
6935-40 Conveying Hose, 2-1/2" ID x 40' (12.2m) long
6935-50 Conveying Hose, 2-1/2" ID x 50' (15.2m) long
6936-10 Conveying Hose, 3" ID x 10' (3.1m) long
6936-20 Conveying Hose, 3" ID x 20' (6.1m) long
6936-30 Conveying Hose, 3" ID x 30' (9.1m) long
6936-40 Conveying Hose, 3" ID x 40' (12.2m) long
6936-50 Conveying Hose, 3" ID x 50' (15.2m) long

Line Vac Hose Specifications

Model # Hose ID Hose OD Working Pressure (psi/Bar) Approx. Bending Radius Weight
inches mm inches mm @ 68°F (20°C) @ 104°F (40°C) inches @ 68°F cm @ 20°C lbs./ft kg/m
6928 3/8 9.5 .594 15.1 225*/15.5 125**/8.6 -- -- 0.04 0.06
6929 1/2 12.7 .750 19.1 200*/13.8 100**/6.9 -- -- 0.13 0.19
6930 3/4 19.0 1.01 25.6 110/7.6 70/4.8 3 1.18 0.19 0.28
6931 1 25.4 1.26 32.0 85/5.9 60/4.1 3 1.18 0.26 0.39
6932 1-1/4 31.7 1.56 39.6 85/5.9 60/4.1 4 1.56 0.35 0.52
6933 1-1/2 38.1 1.83 46.5 70/4.8 50/3.4 5 1.97 0.48 0.71
6934 2 50.8 2.32 59.0 65/4.5 45/3.1 7 2.76 0.66 0.98
6935 2-1/2 63.5 2.87 73.0 65/4.5 45/3.1 8 3.15 0.87 1.29
6936 3 76.2 3.43 87.0 60/4.1 40/2.8 10 3.94 1.24 1.84

* tested at 70°F (21°C)

** tested at 122°F (50°C)

Infinite control of the flow rate through the Line Vac can be controlled by a pressure regulator. Kits include a pressure regulator that is sized properly for flow. The actual conveying rate is affected by the size, mass and geometry of the part to be conveyed along with the length, lift and number of bends in the hose, tube or pipe. These variables make it difficult to determine the exact conveying rate for any product, however, our Application Engineers can assist you by comparing the material you want to convey with something that has already been tested.

Many applications require that materials be transported over longer distances. The Heavy Duty Line Vac can move more material over longer lengths. They have been designed for rugged, industrial applications.

The table below gives a quick comparison of our Light Duty Line Vac, standard Line Vac and the Heavy Duty Line Vac models. For comparison, the test shows the 2" (51mm) model of each style conveying the same material over various lengths. Heavy Duty Line Vac conveys more material in less time.

Rock Salt Conveying Rate Comparison

Model 100 Feet (30.5m) 200 Feet (61m)
Model 130200 2" (51mm) Light Duty Line Vac 166 lbs/hr. (75.3 kg/hr.) N/A
Model 6084 2" (51mm) Line Vac 334 lbs/hr. (151.5 kg/hr.) 85 lbs/hr. (38.6 kg/hr.)
Model 150200 2" (51mm) Heavy Duty Line Vac 524 lbs/hr. (237.7 kg/hr.) 200 lbs/hr. (90.7 kg/hr.)
Horizontal conveying tested at 80 PSIG (5.5 BAR).

Special Line Vacs

EXAIR manufactures special Line Vacs suited to specific application requirements. Configurations and materials can vary according to the application requirements.

Stainless Steel Line Vac
A special 3/4" (19mm) Stainless Steel Line Vac evacuates fumes from a silicone wafer etching operation.

Line Vac can be engineered to retrofit existing machinery. The Line Vac (shown right) has special flanges that permit direct mounting to a machine used in the manufacturing of silicon wafers for the semiconductor industry. This flanged Line Vac is used to remove acidic vapors resulting from surface etching of the silicon wafer. Ordinarily, EXAIR’s Stainless Steel Air Amplifier would have been used since it moves much higher volumes of air. In this case, the Line Vac was the better choice since the exhaust piping was long with many bends that would have created high back pressure. The directed nozzles of the Line Vac overcame this downstream resistance.

This special Line Vac is used to fill small packets.
This special Line Vac is used to fill small packets.

Filling small packets with fine powders or granulated materials such as salt or sugar is done using small tubes that are gravity fed from a hopper. This works well when the material is dry, however, moist materials would often pack the tube, blocking the flow. The special funnel shaped Line Vac (shown right) created a suction on the existing tube to permit continuous product flow.

PVDF Line Vac
This special flanged 1-1/2" (38mm) Line Vac is made of PVDF to withstand a chloride washdown.

The special flanged Line Vac (shown right) is made of PVDF, a plastic that has a high chemical resistance. In this case, the 1-1/2" (38mm) Line Vac was regularly exposed to a chloride wash, a chemical that would corrode stainless steel. QF flanges were provided on each end to allow easy removal of the conveying hoses for cleaning purposes.

Miniature Line Vac
A special miniature Line Vac used to vacuum microscopic debris measures the same size as a penny!

The special miniature Line Vac with barb fittings (shown right) was designed for a manufacturer of integrated circuit chips. It was used to remove microscopic debris during the chip making process. This small Line Vac generated high vacuum and was the perfect configuration for the confined working space. It has also been used by another manufacturer to vacuum liquid and chips from small drilled holes.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top