- Home >
- Standard Air Wipe Kit
- Case Studies
- Presentation
- Application Search
- CAD
- PDFs
- Videos
- FAQs
Related Info

-
Please Login or Create an Account to Proceed
-
Please Login or Create an Account to Proceed
-
Please Login or Create an Account to Proceed
-
Please Login or Create an Account to Proceed
-
Please Login or Create an Account to Proceed
-
Please Login or Create an Account to Proceed
-
What is the angle of the airflow from the Super Air Wipe?At what pressure should I operate the Super Air Wipe?How do I mount the Super Air Wipe?What is the temperature range for the Super Air Wipe?Is the Super Air Wipe available in materials other than aluminum?What is the recommended gap to have between the product and the Air Wipe?Can I put cold air from a Vortex Tube into the Super Air Wipe?
- Drying after washing, cleaning, plating or coating
- Blowoff dust and contaminants
- Cool hot extruded shapes
- Uniformly wipe surfaces
- Dry extruded profiles, rod and medical tubing
- Eliminate solution carryover - no cross contamination
- Blow excess water from automotive door gaskets
- Remove excess coatings, water and oil
- Dry tube, hose, wire, fiber optics
- Minimize solution loss due to drag-out
- Clean paint gun tips
- Dry screen printed or ink jetted surfaces
- Clean strips and ribbon
- Quiet
- Low air consumption
- Uniform 360° airflow
- Uniform airflow across the entire diameter
- Aluminum models for temperatures up to 150°F (66°C)
- No electricity, no moving parts
- Non-contact - no wiper blade
- Split design - compact, rugged, easy to install
- Lightweight, low profile
- Tapped holes for mounting
- Variable force and flow
- Meets OSHA maximum dead end pressure and noise requirements
- Standard Air Wipe Only
- Standard Air Wipe Kits - includes a Standard Air Wipe, shim set, filter separator and pressure regulator (with coupler).
- Standard Air Wipe Shim Sets - include (1) each of a .001" (0.03mm) and .004" (0.10mm) thick plastic shim.
Features
Applications
Features
Advantages
Features
How the Standard Air Wipe Works |
|
![]() |
|
Compressed air flows through an inlet (1) of the Air Wipe into an annular chamber (2). It is then throttled through a small ring nozzle (3) at high velocity. This primary airstream adheres to the Coanda profile (4), which directs it down the angled surface of the Air Wipe. A low pressure area is created at the center (5) inducing a high volume flow of surrounding air into the primary airstream. As the airflow leaves the Air Wipe, it creates a conical 360° ring of air that attaches itself to the surface of the material running through it (6), uniformly wiping the entire surface with the high velocity airflow. |
Features
Standard Air Wipe Performance |
|||
80 PSIG (5.5 BAR) | Air Consumption | Sound Level @ 3' (914mm) | |
Model | SCFM | SLPM | dBA |
2429 | 11.1 | 314 | 82 |
2430 | 13.9 | 394 | 80 |
2431 | 19.1 | 541 | 80 |
2432 | 29.5 | 835 | 81 |
2433 | 39.8 | 1,127 | 82 |
2434 | 50.2 | 1,422 | 82 |
2435 | 60.6 | 1,716 | 82 |
2436 | 71 | 2,010 | 84 |
2437 | 81.3 | 2,302 | 85 |
2439 | 102.1 | 2,891 | 87 |
2441 | 122.8 | 3,477 | 89 |
Features
Standard Air Wipe Dimensions |
|||||
![]() |
|||||
Model |
A |
B |
C |
D |
|
2429 | in | 3.13 | 1.13 | 0.38 | 2.38 |
mm | 79 | 29 | 10 | 60 | |
2430 | in | 3.25 | 1.13 | 0.50 | 2.50 |
mm | 83 | 29 | 13 | 64 | |
2431 | in | 3.75 | 1.13 | 1 | 2.95 |
mm | 95 | 29 | 25 | 75 | |
2432 | in | 4.75 | 1.13 | 2 | 3.95 |
mm | 121 | 29 | 51 | 100 | |
2433 |
in | 5.75 | 1.13 | 3 | 4.95 |
mm | 146 | 29 | 76 | 126 | |
2434 | in | 6.75 | 1.13 | 4 | 5.95 |
mm | 172 | 29 | 102 | 151 | |
2435 | in | 7.75 | 1.13 | 5 | 6.95 |
mm | 197 | 29 | 127 | 176 | |
2436 | in | 8.75 | 1.13 | 6 | 7.95 |
mm | 222 | 29 | 152 | 202 | |
2437 | in | 9.75 | 1.13 | 7 | 8.95 |
mm | 248 | 29 | 178 | 227 | |
2439 | in | 11.75 | 1.13 | 9 | 10.95 |
mm | 299 | 29 | 229 | 278 | |
2441 | in | 13.75 | 1.13 | 11 | 12.95 |
mm | 349 | 29 | 279 | 329 |
Features
Standard Air Wipe Specifications |
Standard Air Wipes are available with ten different throat diameters (I.D.):1/2", 1", 2", 3", 4", 5", 6", 7", 9" and 11" (13, 25, 51, 76, 102, 127, 152, 178, 229 and 279mm). Special diameters are available. Please contact our factory.
Compressed Air Inlets: The Standard Air Wipe has compressed air inlets on each half. General purpose compressed air hose is supplied with sizes up to 4" (102mm) that couples the air supply of one half to the other. Sizes 9" (229mm) and larger have two inlets on each half that must be supplied with compressed air to maintain uniform airflow. Filtration: The use of clean air is essential. Kits include an automatic drain filter with a 5 micron filter element that is sized properly for flow. Materials of Construction: The Standard Air Wipe is constructed of aluminum. All models use coated screws and plastic shims. General purpose PVC air hose is included with sizes up to 4" (102mm). Temperature: The Standard Air Wipe is rated for temperatures up to 150°F (66°C). Mounting: The Standard Air Wipe can be supported by the compressed air supply pipe. Tapped holes (1/4-20) on the downstream side of the Standard Air Wipe can also be used for mounting. Regulation: A pressure regulator on the compressed air supply provides infinite control of flow, force and air consumption. Kits include a pressure regulator that is sized properly for flow. Shim Sets: The Standard Air Wipe has a .002" (0.05mm) gap setting. The compressed air exhausts through a gap which is set with a plastic shim positioned between the cap and body of the Standard Air Wipe. Force and flow through the Standard Air Wipe may be easily increased by adding shims to open the gap. Kits include a shim set (three additional shims). Shim sets include a .001" (0.03mm), .003" (0.08mm) and .004" (0.10mm) thick plastic shim. |
Features
Standard Air Wipe Standards and Certifications


EXAIR Standard Air Wipes comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.
Options
Standard Air Wipe Systems |
||||
Standard Air Wipes are available in two different model types: |
||||
I.D. |
Standard Air Wipe Only |
Standard Air Wipe Kit |
Standard Air Wipe Shim Set |
|
1/2" (13mm) | 2430 | 2480 | 2350 | |
1" (25mm) | 2431 | 2481 | 2351 | |
2" (51mm) | 2432 | 2482 | 2352 | |
3" (76mm) | 2433 | 2483 | 2353 | |
4" (102mm) | 2434 | 2484 | 2354 | |
5" (127mm) | 2435 | 2485 | 2355 | |
6" (152mm) | 2436 | 2486 | 2356 | |
7" (178mm) | 2437 | 2487 | 2357 | |
9" (229mm) | 2439 | 2489 | 2359 | |
11" (279mm) | 2441 | 2481 | 2361 |
Options
Options
Accessories

Standard Air Wipe Shim Sets - The Standard Air Wipe has a .002" (0.05mm) gap setting. The compressed air exhausts through a gap which is set with a plastic shim positioned between the cap and body of the Standard Air Wipe. Force and flow through the Standard Air Wipe may be easily increased by adding shims to open the gap. Kits include a shim set (six additional shims). Shim sets include (2) each of a .001" (0.03mm), .003" (0.08mm) and .004" (0.10mm) thick plastic shim.
Cooling Extruded Tubing
The Problem: The extruded product, being hot and pliable, would slump and produce a crooked length of tubing. The customer tried using a series of rollers to support the extrusion until it cooled enough to become stiff. This helped somewhat, but they still experienced slump between rollers. The end product still would not meet customer specifications.
The Solution: Using a Model 2401 1" (25mm) Super Air Wipe positioned between two rollers, the product was cooled engouh to maintain rigidity. Adding another set of Air Wipe/rollers, they were able to extrude even faster.
Comment: Not only were they able to salvage a $30,000 order, the increased process speed enabled them to re-quote the job at a lower price and secure future business from their customer.
Images
-
Standard Air Wipe Kit
-
This Standard Air Wipe is blowing coolant off the part and back into the centerless grinder.
-
Standard Air Wipe
-
The Standard Air Wipe has 10 sizes available in stock.
-
This 1" Standard Air Wipe is blowing off the excess coating from a wire into a dip tank.
Available + -
Features + -
Options + -
Related Products + -
My Cart + -
You have no items in your shopping cart.