Hot Tap Digital Flowmeter™

EXAIR’s Hot Tap Digital Flowmeter™ allows for installation under pressure, eliminating the need to isolate and remove pressure from
Only %1 left

View More
EXAIR’s Hot Tap Digital Flowmeter™ allows for installation under pressure, eliminating the need to isolate and remove pressure from the pipe it is being installed upon. It incorporates two valves that the probes pass through and a muffler that collects chips from the drilling process. It takes an equally short amount of installation time as the standard meters. Available on 2" through 8" flowmeters. The digital display shows the exact amount of compressed air being used, making it easy to identify costly leaks or inefficient air products. No cutting, welding, adjustments or calibration are ever required. Hot Tap Digital Flowmeters are not a stock item and ship in three to five days. Consult the factory for NEMA 4 flowmeters.

Advantages

  • Easy to install - No moving parts
  • Summing Remote Display and Data Logger available
  • Optional RS-485 output serial communication board available
  • Sensitive at low flows
  • No calibration or setup required
  • Includes all components for installation
  • Models are available for sizes 2" to 8" in iron pipe
  • Models are available for sizes 2" to 6" in copper pipe

Digital Flowmeter Models

  • Models are available for 2" through 8" Schedule 40 iron pipe.
  • Models are available for 2" through 6" copper pipe.
  • Metric or English unit displays can be specified for all model sizes.

Accessories

USB Data Logger

EXAIR's award-winning USB Data Logger Model 9147 connects directly to the Digital Flowmeter and is simple to use. It can be configured to record flow rate from once per second to once every 12 hours. Data can be read with included software or imported into a spreadsheet.

Summing Remote Display

The Summing Remote Display allows remote viewing of Digital Flowmeter data. Additional features include: current air consumption, usage for the previous 24 hours, and total cumulative usage.

Block-Off Ring

The Block-Off Ring is necessary should you decide to remove or relocate your Digital Flowmeter.

Specifications - Digital Flowmeter

Accuracy5% of reading plus 1% of range for flows from 10% to 100% of indicated range at air temperatures between 20° to 120°F.
Operating Pressure130 PSIG maximum on Sch. 40 iron. Consult EXAIR for other materials and at higher pressures.
Input Power250 mA at 24 VDC
Output Resistance600 Ohms maximum
Wetted MaterialsStainless steel, gold, thermal epoxy, Viton, PTFE, Aluminum
Ring MaterialAluminum
DisplayFour-digit LED display
Response TimeOne second to 63% of change in value at flows above 30% of range.
Pressure RangeN/A
ComplianceCE and RoHS
Note: For use with compressed air and nitrogen only.
EXAIR Hot Tap Digital Flowmeter Dimensions

Hot Tap Digital Flowmeter - Schedule 40 Pipe

   

A

Model Pipe
Size
in mm
H9095 2" 6.43 163
H9096 2-1/2" 7.20 183
H9097 3" 7.82 199
H9098 4" 8.82 224
H90100 6" 10.95 278
H90101 8" 12.95 329

Hot Tap Digital Flowmeter - Copper Pipe

   

A

Model Pipe
Size
in mm
H9095CU 2" 6.18 157
H9096CU 2-1/2" 6.95 177
H9097CU 3" 7.45 189
H9098CU 4" 8.45 215
H90100CU 6" 10.45 265

Awards - Digital Flowmeter

2013 Environmental Protection Product of the Year Winner

EXAIR's Digital Flowmeter was a winner in the 2013 Environmental Protection Product of the Year Awards. The Digital Flowmeter family won in the Energy Management category.

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this Product Efficiency Survey to give us the details about your current application and blowoff set up. You can also feel free to contact an Application Engineer for more information at (800) 903-9247 or (513) 671-3322.

After completing the form, your product can be shipped to: Efficiency Lab, EXAIR, 11510 Goldcoast Dr., Cincinnati, OH 45249-1621

This offer is available to all customers in the U.S. and Canada only. Some restrictions might apply.

Products must be shipped to EXAIR freight prepaid. EXAIR will pay the return shipping via UPS ground.

If you cannot send in your product, fill out this Product Efficiency Survey to give us the details about your current application and we will estimate the savings for you.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top