Model 120321 1-1/4" Super Air Amplifier Shim Set

Super Air Amplifiers under 8"(203mm) are supplied with a .003"(0.08mm) slotted air gap which is ideal for most applications. The
Model
120321
$29.00

View More
Super Air Amplifiers under 8"(203mm) are supplied with a .003"(0.08mm) slotted air gap which is ideal for most applications. The Model 120028 8"(203mm) Super Air Amplifier is supplied with a .009" (0.23mm) air gap. Flow and force can be increased by replacing the shim with a thicker .006" (0.15mm) or .009" (0.23mm) shim. Super Air Amplifier Shim Sets include (1) .006" (0.15mm) and (1) .009" (0.23mm) stainless steel shim (except Model 120028, which also includes (1) .015"(0.39mm) stainless steel shim).

Super Air Amplifier Systems

Super Air Amplifiers are available in four different model types:

  • Super Air Amplifier Only
  • Super Air Amplifier Kits - include a Super Air Amplifier, shim set, filter separator and pressure regulator (with coupler).
  • Deluxe Super Air Amplifier Kits - include a Super Air Amplifier, EFC, shim set, filter separator and pressure regulator (with coupler).
  • Super Air Amplifier Shim Sets - include (1) .006" (0.15mm) and (1) .009" (0.23mm) stainless steel shims (except 8" which include (1) .015"(0.39mm) stainless steel shim).
ModelOutlet Diameter
3/4" (19mm)1-1/4" (32mm)2" (51mm)4" (102mm)8" (203mm)
Super Air Amplifier Only120020120021120022120024120028
Super Air Amplifier Kit120220120221120222120224120228
Deluxe Super Air Amplifier Kit120220DX120221DX120022DX120024DX120028DX
High Temperature Air Amplifier OnlyN/A12021N/AN/AN/A
High TemperatureAir Amplifier KitN/A121221N/AN/AN/A
Super Air Amplifier Shim Set120320120321120322120324120328

NEMA 4 Cabinet Coolers

NEMA 4 (IP66) Cabinet Cooler systems are made from 303 stainless steel, dust and oil tight, splash resistant, indoor/outdoor capable and corrosion resistant. By incorporating a low pressure valve for all air exhaust, the valve closes and seals when not operating to maintain NEMA 4X enclosure integrity.

Thermostat control systems (Models 4804-4880) are the most efficient system because it will turn itself on and off as needed to cool your enclosure. Includes cooler, solenoid valve and thermostat, filter separator and cold air distribution kit. Models are available in 110VAC, 240VAC and 24VDC.

Continuous operation systems (Models 4704-4780) include the cooler, a filter separator and cold air distribution kit.

ETC Thermostat control systems provide on the fly temperature adjustment and an internal temperature feedback display.

High Temperature Cabinet Cooler systems should be used when ambient temperatures reach 125°F to 200°F (52°C to 93°C).

Non-Hazardous Purge (NHP) models provide a continuous positive purge within the enclosure to prevent contaminants from entering. They are suited for extremely dirty and dusty environments.

Dual Cabinet Cooler systems (Models (##50-##80) provide for additional cooling.

High Temperature Air Amplifier Standards and Certifications

CE Compliant OSHA Safe!

EXAIR Air Amplifiers comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC).All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Awards - Super Air Amplifier

1999 Plant Engineering Product of the Year Finalist

EXAIR's Super Air Amplifiers were a finalist in the 1999 Plant Engineering Product of the Year Awards. The Super Air Amplifier family placed in the Compressed Air category.

Special Air Amplifiers

Special High Temperature Air Amplifier Model 121021

EXAIR will manufacture special Air Amplifiers suited to your specific application requirements. The Model 121021 High Temperature Air Amplifier was developed for moving hot air to surfaces requiring uniform heating while in a furnace or oven. Modeled after our Super Air Amplifier, the High Temperature Air Amplifier is the most efficient for pushing high volumes of hot air to points that typically remain cool. This special design is rated for environments up to 700°F (374°C) and its surface is protected from heat stress by a mil-spec. coating process (developed for the aircraft industry), allowing easy disassembly for changing shims or cleaning.

Special Flanged Air Amplifier

Another stainless steel version for flange mounting was developed as a fan back-up for exhausting flue gases from a furnace. In the event of a power failure, this special Air Amplifier can quickly evacuate the fumes that could be harmful to workers close by.

Special Adjustable Air Amplifier with PTFE plug

A PTFE plug was used with a stainless steel Adjustable Air Amplifier to help pull a sticky material through a process and prevent the material from depositing on the Air Amplifier. EXAIR's Intelligent Compressed Air® products can be manufactured to your special requirements.

If you have special requirements, please contact an Application Engineer to discuss it.

How to Determine Super Air Amplifier Total Output Flow and Air Consumption

Total Output Flow - Super Air Amplifier

Total Airflow: From the performance curves (above), determine total output flow for any Super Air Amplifier at any pressure.

Example: A Model 120021 at 60 PSIG (4.1 BAR) supply air pressure has a total output flow of 120 SCFM (3,398 SLPM).

Air Consumption: Divide total output flow by the amplification ratio to determine air consumption for any Super Air Amplifier at any air pressure.

In the example above, the Model 120021 at 60 PSIG (4.1 BAR) supply air pressure has a total output flow of 120 SCFM (3,398 SLPM). Dividing this total output flow by its amplification ratio of 18 gives an air consumption of 6.7 SCFM (189 SLPM).

Total Output Flow with 0.003" (0.08mm) thick shim installed. Excludes downstream entrainment. Model 120028 tested with a 0.009" (0.23mm) shim.

Air Amplifier Model Selection Guide

 EfficiencySound LevelMounting FlangeFlow AdjustmentTemperature RatingCorrosive Applications
Super Air AmplifierHighLowYesWith Shims275F° (135C°)No
Aluminum Adjustable Air AmplifierMediumVariableNoInfinite (no Shims)275F° (135C°)No
Stainless Steel Adjustable Air AmplifierMediumVariableNoInfinite (no Shims)400F° (204C°)Yes
High Temperature Air AmplifierHighLowNoWith Shims700F° (374C°)Yes
Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
More Information
Outlet diameter - inches 1-1/4" (32mm)
Back To Top