The patented ATEX EasySwitch has been designed to be used in hazardous or sensitive environments, such as applicable ATEX-rated zones, with features supporting appropriate filtration, grounding and safety. The new EXAIR ATEX EasySwitch Vacuum System is designed for the collection of dry, wet, or liquid materials in industrial and commercial environments. Typical applications include routine maintenance cleaning, workstation cleanup, and process waste collection in manufacturing, workshops or production areas.

Patent No. 11,969,134

Warning:
Wet: Do not use with any material that has a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline or kerosene.

Applications

Coolant
Chips
Floor Cleanup
Drains
Shavings
Sawdust
Absorbent
Mold and allergen removal

Advantages

Easy to switch from liquid to dry material
High performance with minimal air requirements
Low sound level
Maintenance free
Safe - no electricity
Spill free - auto safety shutoff
No motors to clog or wear out
Continuous duty
Certified for use in Equipment Group II, Category 2 ATEX environments (Zones 1 and 21)

Styles

ATEX EasySwitch Wet-Dry Vac Styles

Two styles are available:

The Premium ATEX EasySwitch Wet-Dry Vac System has been designed to be used in hazardous or sensitive environments, such as applicable ATEX-rated zones, with features supporting appropriate filtration, grounding and safety. Standard or Bonded HEPA Filter available.

Whats Included?

What's Included

ATEX EasySwitch bonded vac unit
ATEX EasySwitch bonded drum lid
Bonded 55 Gallon Drum
Bonded drum dolly
Standard Filter or bonded HEPA filter
25' Grounding Cable
1/2 NPT 20' Static conductive air supply hose assembly
Pressure gauge
10’ of 1-1/2" (38mm) Static conductive vacuum hose
Bonded tool holder
Extension wand
2 pc Aluminum wand
Round dust brush
Skimmer tool
24" crevice tool
11" crevice tool
12" wide floor tool

Specifications

Performance

How It Works

Performance

ATEX EasySwitch Wet-Dry Vac Performance
Pressure Supply		Air Consumption		Lift		Vacuum Flow		Sound Level
PSIG	BAR	SCFM	SLPM	"H₂O	mm Hg	CFM	LPM	dBA
80	5.5	53	1,500	-168	-314	90	2,548	79
90	6.2	59	1,670	-190	-355	92	2,605	80
100	6.9	65	1,840	-210	-392	94	2,661	82

Conveying Rate Comparison for ATEX EasySwitch Wet-Dry Vac
Pressure Supply		Water		Plastic Tumbling Media		Steel Shot
PSIG	BAR	GPM	LPM	lbs/min	kg/min	lbs/min	kg/min
80	5.5	36	136	68	31	54	24

How It Works

How the ATEX EasySwitch Wet-Dry Vac Works

Step 1: Pull the rubber filter lid handle and lift up to release the latch. Step 2: Gently push the vacuum and muffler assembly away from the filter lid latch and let it rest. Remove the pleated filter when using the vacuum for liquids. Install the filter to rest upon the filter port edge gasket when used with dry materials. Step 3: Move the vacuum and muffler cylinder assembly back to the vertical position and close the filter lid. Step 4: Replace the rubber lid handle by pulling and replacing it into its metal receiver.
Warning: Do not use with any material that has a low flash point or with flammable liquids such as fuel oil, alcohol, mineral spirits, gasoline, or kerosene.