Digital Flowmeter™ with Wireless Capability

EXAIR's Digital Flowmeter™, with wireless capability, is the easy way to monitor compressed air consumption and waste over a ZigBee
Only %1 left

View More
EXAIR's Digital Flowmeter™, with wireless capability, is the easy way to monitor compressed air consumption and waste over a ZigBee wireless mesh network! The digital display shows the exact amount of compressed air being used making it easy to identify costly leaks or inefficient air products. No cutting, welding, adjustments or calibration are ever required. It is designed for permanent or temporary mounting to a compressed air pipe. If the unit needs to be removed, blocking rings are available for most models. Available for measuring air flow in SCFM or m3/hr on 1/2" thru 8" Schedule 40 Iron Pipe, 25mm thru 101mm Aluminum Pipe and for Copper Pipe up to 4". Consult the factory for NEMA 4 flowmeters.

Advantages

  • Provides wireless monitoring of EXAIR flowmeters throughout a plant
  • Configured to prevent unwanted joining upon the network and to provide encryption of communication within the network.
  • No moving parts
  • Monitoring software provided at no charge
  • Utilizes mesh networking protocol to relay data from remote meters
  • Transmits current air usage and cumulative air usage data
  • 128 bit encryption for wireless transmissions
  • Identify areas with high compressed air use
  • Models from 1/2" to 4" Schedule 40 iron pipe in stock
  • Models are also available for 5", 6" and 8" in iron pipe
  • Models are available for sizes 3/4" to 4" in copper pipe
  • Models are available for sizes 25mm to 101mm in aluminum pipe
  • Easy to install

Digital Flowmeter Models

  • Models are available for 1/2" through 8" Schedule 40 iron pipe.
  • Models are available for 3/4" through 4" copper pipe.
  • Units can display Metric or English units in all model sizes.
  • Models are available for sizes 25mm to 101mm in aluminum pipe
  • Models can be ordered with or without drill guides.

Accessories

Block-Off Ring

The Block-Off Ring is necessary should you decide to remove or relocate your Digital Flowmeter.

Drill Guide Kit

The Drill Guide Kit provides precise positioning to drill the holes in your pipe necessary for the probes on the Digital Flowmeter.

EXAIRLogger Software

EXAIR Logger Graphing Software

To make it easier to interpret the data you will receive from EXAIR's Digital Flowmeter with wireless capability (especially from multiple Flowmeters), EXAIR offers special software that is specifically designed to work with it. EXAIRLogger software not only records flow history but also presents it in graphical format for quick analysis.

Download EXAIRLogger Software Here

Device Discovery Software

When setting up or adding devices to your ZigBee network, this software makes it easy to locate their addresses.

Download Device Discovery Software Here

Specifications - Digital Flowmeter

Accuracy5% of reading plus 1% of range for flows from 10% to 100% of indicated range at air temperatures between 20° to 120°F.
Operating Pressure200 PSIG maximum on Sch. 40 iron and on Type L Copper below 3". Consult EXAIR for other materials and at higher pressures.
Input Power250 mA at 24 VDC
Output Resistance600 Ohms maximum
Wetted MaterialsStainless steel, gold, thermal epoxy and Viton
Ring MaterialAluminum
DisplayFour-digit LED display
Response TimeOne second to 63% of change in value at flows above 30% of range.
Pressure RangeN/A
ComplianceCE and RoHS
Note: For use with compressed air and nitrogen only.

Dimensions - Small Digital Flowmeter with Wireless Capability

Wireless Digital Flowmeter Dimensions
   

A

Series Pipe
Size
in mm
9090Z 1/2" 3.28 83
9091Z 3/4" 3.46 88
9092Z 1" 3.84 97
9094Z 1-1/2" 4.59 117

Dimensions - Large Digital Flowmeter with Wireless Capability

Wireless Digital Flowmeter Dimensions
   

A

Series Pipe
Size
in mm
9095Z 2" 5.34 136
9096Z 2-1/2" 6.09 155
9097Z 3" 6.71 171
9098Z 4" 7.71 196

 

Gateway Dimensions

EXAIR Gateway Dimensions

Awards - Wireless Digital Flowmeter

Environmental Protection 2018 Product of the Year Award

EXAIR's Wireless Digital Flowmeter was a winner in the 2018 Environmental Protection Product of the Year Awards. The Wireless Digital Flowmeter won in the Energy Management category.

2017 Plant Engineering Product of the Year Award

EXAIR's Wireless Digital Flowmeter was a gold award winner in the 2017 Plant Engineering Product of the Year Awards. The Wireless Digital Flowmeter placed in the Compressed Air category.

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this Product Efficiency Survey to give us the details about your current application and blowoff set up. You can also feel free to contact an Application Engineer for more information at (800) 903-9247 or (513) 671-3322.

After completing the form, your product can be shipped to: Efficiency Lab, EXAIR, 11510 Goldcoast Dr., Cincinnati, OH 45249-1621

This offer is available to all customers in the U.S. and Canada only. Some restrictions might apply.

Products must be shipped to EXAIR freight prepaid. EXAIR will pay the return shipping via UPS ground.

If you cannot send in your product, fill out this Product Efficiency Survey to give us the details about your current application and we will estimate the savings for you.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top