Model 8430DX 30" Gen4 Deluxe Standard Ion Air Knife Kit

EXAIR's Gen4 Deluxe Standard Ion Air Knife Kits include everything needed to ensure best performance from your Gen4 Standard Ion
Model
8430DX
$4,338.00

View More
EXAIR's Gen4 Deluxe Standard Ion Air Knife Kits include everything needed to ensure best performance from your Gen4 Standard Ion Air Knife: electronic flow control, universal air knife mounting bracket, power supply, shim set, filter separator and pressure regulator. The Gen4 Standard Ion Air Knife uses our Standard Air Knife (30:1 air amplification) to deliver a sheet of ionized air to a charged surface. Air consumption and noise are somewhat higher than the Gen4 Super Ion Air Knife. The Gen4 Standard Ion Air Knife removes static electricity from plastics, webs, sheet stock and other product surfaces where tearing, jamming or hazardous shocks are a problem. Production speeds, product quality and surface cleanliness can improve dramatically.

Advantages

  • 30% improved performance
  • Rugged metal armored and electromagnetically shielded cable
  • Integrated ground eliminates additional ground connection
  • Durable stainless steel connections to Power Supply
  • Reduced air consumption
  • 30:1 air amplification
  • Low noise level
  • Effective up to 20 feet (6.1m)
  • Shockless, non-radioactive
  • Compact, rugged, easy to install
  • Unlimited system lengths
  • Low maintenance
  • Variable force and flow

Gen4 Standard Ion Air Knife Models

Gen4 Standard Ion Air Knives are available in four different model types:

  • Gen4 Standard Ion Air Knife - includes the Standard Air Knife and Gen4 Ionizing Bar assembly. Does not include power supply.
  • Gen4 Standard Ion Air Knife Systems - include a Gen4 Standard Ion Air Knife and Model 7960 Gen4 Power Supply (115/230 VAC, 50/60Hz).
  • Gen4 Standard Ion Air Knife Kits - include a Gen4 Standard Ion Air Knife,Model 7960 Gen4 Power Supply, shim set, filter separator and pressure regulator (with coupler).
  • Gen4 Deluxe Standard Ion Air Knife Kits - include a Gen4 Standard Ion Air Knife, Model 7960 Gen4 Power Supply,EFC, Universal Air Knife Mounting System, shim set,filter separator and pressure regulator (with coupler).
Length
Gen4 Standard Ion Air Knife
Gen4 Standard Ion Air Knife Systems
Gen4 Standard Ion Air Knife Kit
Gen4 Deluxe Standard Ion Air Knife Kit
3" (76mm)8103820384038403DX
6" (152mm)8106820684068406DX
9" (229mm)8109820984098409DX
12" (305mm)8112821284128412DX
18" (457mm)8118821884188418DX
24" (610mm)8124822484248424DX
30" (762mm)8130823084308430DX
36" (914mm)8136823684368436DX
42" (1127mm)8142824284428442DX
48" (1219mm)8148824884488448DX

Accessories

Static Eliminator Power Supplies

Power Supplies - The Model 7960 (2 outlet) and Model 7961 (4 outlet) selectable voltage power supplies are available for 115 VAC or 230 VAC, 50/60Hz systems. A 6' (1.83m) modular power cord and lighted power switch are included. Power Supplies are UL Component recognized to U.S. and Canadian Standards, and are CE and RoHS compliant.

Universal Air Knife Mounting System

Universal Air Knife Mounting System - The Model 9060 Universal Air Knife Mounting System is used to provide secure, precise positioning for any of the EXAIR Air Knives. The Air Knife can quickly and easily be moved within close proximity of the part to improve effectiveness. The Universal Air Knife Mounting System has a durable, stainless steel construction that is suitable for a variety of industrial applications.

For the Standard Ion Air Knife, it can be top mounted on any length. Bottom mounting is possible on Standard Ion Air Knives that are 9" (229mm) or longer.

The Universal Air Knife Mounting System can be articulated into any position and provides a maximum extension of 30" (762mm). A 1/2" diameter hole is required for mounting. Alternatively, the bolt can be threaded directly into a 1/2"-13 tapped hole. For any style Air Knife that is 24" (610mm) to 54" (1372mm), use (2) Universal Air Knife Mounting Systems. For knives 55" (1397mm) - 71" (1803mm), use (3). For 72" (1829mm) - 95" (2413mm), use (4). For knives 96" (2438mm) and over, use (5).

Air Knife Plumbing Kits

Air Knife Plumbing Kits - Super Air Knives that are 24" or longer must be supplied with compressed air at multiple inlets on the knife. Air Knife Plumbing Kits prevent you from searching for the right fittings or using undersized air supply lines. They provide properly sized compressed air hose or pipe, and fittings to interconnect the bottom or end compressed air inlets for best performance. Plumbing kits for aluminum Super Air Knives include a pressure gauge to monitor pressure at the Super Air Knife, which is an indication of proper air supply. They also include nitrile/PVC hose and brass fittings.

Air Knife Coupling Brackets

Coupling Bracket Kits - Some applications require a Super Air Knife that is longer than our 108" (2743mm) length. Coupling Bracket Kits that join two Super Air Knives together are available. The kit includes two rigid plates along with the assembly screws. The bottom plate is supplied with a hole to access the bottom compressed air inlets. All models include stainless steel screws.

Air Knife Shim Sets

Air Knife Shim Sets - Compressed air exhausts through a gap in the Air Knife which is set with a shim. Force and flow may be increased by adding shims.

Shim sets for aluminum Super Air Knives include a .001" (0.03mm) Amber color, .003" (0.08mm) Green color, and .004" (0.10mm) thick Tan color plastic shim . A Red color .002" (0.05mm) thick shim comes installed in the Super Air Knife.

Gen4 Standard Ion Air Knife Performance

Pressure Supply

Air Consumption*

Sound Level

Dissipates

5kV**

PSIGBARSCFMSLPMdBASeconds
50.36170660.38
100.78227680.28
201.416453690.29
402.824679780.21
604.132906840.21
805.5411,160870.21
1006.9491,387900.21

* per foot (305mm) of length

** 6" (152mm) from target

Gen4 Standard Ion Air Knife Specifications

Lengths

3", 6", 9", 12", 18", 24", 30", 36", 42", 48" (76, 152, 229, 305, 457, 610, 762, 914, 1067, and 1219 mm)

Special lengths and unlimited system lengths are available (please contact our factory)

Cablea 5' (1.52m) length of armored, electromagnetically shielded cable is included
Power SupplyEXAIR Model 7960 or 7961 Power Supply (5kV) is required for Standard Ion Air Knife operation. Power supplies are equipped with a 6' (1.83m) power cord, lighted power switch and (2) or (4) high voltage outlets.
Compressed Air1/4 NPT outlets are provided on each end of the Standard Air Knife.
ElectricalFor use with 5 kVrms, 5 milliamperes (max) power supply
Electrical HazardGen4 Ionizing bars are shockless (less than 40 microamperes short circuited). Do not use near flammable materials or gases.
Materials of Construction
Metal partsAluminum
Plastic partsUL rated 94 HB
EmittersStainless Steel
Maximum ambient temperature165°F (74°C)

Gen4 Standard Ion Air Knife Dimensions

EXAIR Gen4 Standard Ion Air Knife Dimensions

How the Gen4 Standard Ion Air Knife Works

How EXAIR's Super Ion Air Knife Works

Compressed air flows through the inlet (1) into a plenum chamber. It is then throttled through a thin nozzle (2) extending the length of the Standard Ion Air Knife. This primary airstream adheres to the Coanda profile (3), which turns it 90° and directs the flow down the face of the unit. The primary stream immediately beings to entrain surrounding air (4), for an amplification ratio of 30:1 at 6" (15xmm) away. An electrically powered ionizing bar fills the curtain of air with positive and negative charges. The airstream delivers these static eliminating ions to the product surface where it is instantly neutralized and cleaned of dust and other particulates.

Static Eliminator Standards and Certifications

OSHA Safe!

EXAIR's Gen4 Super Ion Air Knife complies with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

RoHS Compliant

The Intellistat Ion Air Gun and Intellistat Ion Air Nozzle are UL Listed, and are CE and RoHS compliant.

Gen4 Ionizing Bars and Gen4 Power Supplies are UL Component Recognized to U.S. and Canadian safety standards, and are CE, EMC and RoHS compliant.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Selecting the Right EXAIR Static Eliminator

Static Eliminators with Air

Combining our engineered airflow products with ionizers gives us the ability to eliminate the charge quickly and at great distances. Laminar flow airstreams make it possible to blow away any contaminants and the charge that attracts them. They are ideal for:

  • Hard to reach places or obstructed surfaces
  • Product moving at high speeds
  • Surfaces with an extremely high charge

Compressed air consumption and noise are minimized while providing force that can be adjusted from a “blast” to a “breeze”. Tests show these ionizers positioned two feet (610mm) away from a charged surface to be as effective as a Gen4 Ionizing Bar without air delivery positioned one-half inch (13mm) from the surface.

Gen4 Super Ion Air Knife

The Gen4 Super Ion Air Knife provides the best performance of all ionizers. It uses our Super Air Knife (40:1 air amplification) to deliver a uniform sheet of ionized air effective up to 20 feet (6.1m) away.

Gen4 Standard Ion Air Knife

The Gen4 Standard Ion Air Knife uses our Standard Air Knife (30:1 air amplification) to deliver a sheet of ionized air to the surface. Air consumption and noise are somewhat higher than the Gen4 Super Ion Air Knife.

Gen4 Super Ion Air Wipe

The Gen4 Super Ion Air Wipe clamps around the part and creates a ring of ionized airflow. It neutralizes and cleans continuous moving surfaces.

Gen4 Ion Air Cannon

The Gen4 Ion Air Cannon uses our Super Air Amplifier (22:1 air amplification) to provide a focused, conical airstream that is capable of removing the charge up to 15 feet (4.6m) away.

Intellistat Ion Air Gun

The new patented Intellistat Ion Air Gun produces ionized compressed air to neutralize static and remove troublesome particulates during clean processes, test procedures and sensitive assembly work, particularly in laboratories, clean rooms or scientific testing facilities. With a +/-30 volt balance the Intellistat was designed to use minimal compressed air while delivering precise blow-off and exceptional static decay rates capable of reducing 5000 volts to less than 500 in under one second.

Intellistat Ion Air Nozzle

The new patented Intellistat Ion Air Nozzle produces ionized compressed air to neutralize static and remove troublesome particulates during clean processes, test procedures and sensitive assembly work, particularly in laboratories, clean rooms or scientific testing facilities. With a +/-30 volt balance the hands-free Intellistat was designed to use minimal compressed air while delivering precise blow-off and exceptional static decay rates capable of reducing 1000 volts to less than 100 in under one second.

Gen4 Ion Air Gun

The Gen4 Ion Air Gun uses our High Velocity Air Jet (5:1 air amplification) to provide a narrow beam of ionized airflow. This hand-held static eliminator is rugged for industrial use and has incredibly fast static decay rates.

Gen4 Ion Air Jet

The Gen4 Ion Air Jet uses our High Velocity Air Jet (5:1 air amplification), and is an effective spot cleaner. Available for permanent mount or with flexible Stay Set Hose, this ionizer is the ideal way to focus an ionized airflow at confined areas.

Static Eliminators without Air

In some situations, even the smallest amount of airflow can disturb the product. This is especially true for lightweight materials. EXAIR manufactures two styles of ionizers for these critical applications.

Gen4 Ionizing Bar

Gen4 Ionizing Bars are ideal for relatively flat materials, where the bar can be mounted close to the product surface. The Gen4 Ionizing Bar is compact, allowing it to fit in the confined spaces of machinery, where the charge is generated.

Gen4 Ionizing Point

The Gen4 Ionizing Point is effective for spot neutralization. The compact size makes it ideal for winding or slitting operations. It can also be mounted through a duct to neutralize static charges due to moving air or materials.

Special Static Eliminators

Special Static Eliminators

EXAIR manufactures static eliminators suited to specific application requirements. This special ionizer was developed for the automotive industry. This air amplifier and ionizer combination is used to dry water based paints on car bodies while eliminating the possibility of a static charge that might attract dust or other contaminants.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top