Heavy Duty Safety Air Gun with Nozzle and Chip Shield

Choose a Chip Shield installed on EXAIR's Heavy Duty Safety Air Gun to prevent chip blowback toward the operator. This
Only %1 left

View More
Choose a Chip Shield installed on EXAIR's Heavy Duty Safety Air Gun to prevent chip blowback toward the operator. This is a powerful air gun that delivers high force for use in rugged, industrial environments. The 3/8 NPT compressed air inlet increases the compressed air flow available to the Super Air Nozzle, resulting in higher force and flow than other air guns. The durable cast curved trigger makes it comfortable for hours of use without fatigue. These guns with EXAIR engineered nozzles minimize compressed air use, maintain OSHA pressure standard 1910.242(b) and reduce noise exposure by remaining under OSHA standard 29 CFR 1910.95(a) decibel limits.

Applications

  • Part cleaning
  • Chip removal
  • Liquid blowoff
  • Part cooling
  • Part drying

Advantages

  • Lightweight
  • Comfortable to operate during extended use
  • Powerful blast of air
  • Reduced compressed air cost
  • Improved blowoff performance
  • Improved safety
  • Meets OSHA noise level requirements
  • Meets OSHA pressure requirements

Materials

Heavy Duty Safety Air Gun Body

Durable cast aluminum with ergonomic rubber grip.

Nozzle Options

Type 316 stainless steel nozzles provide excellent corrosion resistance. Maximum temperature: 1000°F (538°C).

Zinc aluminum alloy nozzles are good for general purpose applications. Maximum temperature: 250°F (121°C).

PEEK thermoplastic nozzles offer protection from product scratches. Offers excellent chemical resistance. Maximum temperature: 320°F (160°C).

Model 1350-PEEK-12 Heavy Duty Safety Air Gun with 12 inch Aluminum Extension Pipe

Aluminum Extension Pipe - extends the reach of your Heavy Duty Safety Air Gun. Extension Pipes are available in 6" (152mm) to 72" (1829mm) lengths.

Model 900106 coiled compressed air hose.

Coiled Hose with Swivel - Heavy duty compressed air hose that's coiled to conveniently store it when not in use. Available in 12' (3.7m) lengths.

Model 1310SS-CS Heavy Duty Safety Air Gun with Chip Shield

Nozzle: 1100SS Stainless Steel Super Air Nozzle

Model 1310SS-CS Heavy Duty Safety Air Gun with Chip Shield
Inlet: 3/8 FNPT
Air Consumption Force* Sound Level
SCFM SLPM Ozs Grams dBA
14 396 13 369 74

Also available:

1310-CS with 1100 Zinc Aluminum Super Air Nozzle and Chip Shield

1310-PEEK-CS with 1100-PEEK PEEK plastic Super Air Nozzle and Chip Shield

Model 1330SS-CS Heavy Duty Safety Air Gun with Chip Shield

Nozzle: 1122SS Stainless Steel 2" Flat Super Air Nozzle

Model 1330SS-CS Heavy Duty Safety Air Gun with Chip Shield
Inlet: 3/8 FNPT
Air Consumption Force* Sound Level
SCFM SLPM Ozs Grams dBA
22 622 22 624 77

Also available:

1330-CS with 1122 Zinc Aluminum 2" Flat Super Air Nozzle and Chip Shield

Model 1350SS-CS Heavy Duty Safety Air Gun with Chip Shield

Nozzle: 1104SS Stainless Steel Super Air Nozzle

Model 1350SS-CS Heavy Duty Safety Air Gun with Chip Shield
Inlet: 3/8 FNPT
Air Consumption Force* Sound Level
SCFM SLPM Lbs Grams dBA
35 991 1.9 862 82

Also available:

1350-CS with 1104 Zinc Aluminum Super Air Nozzle and Chip Shield

1350-PEEK-CS with 1104-PEEK PEEK plastic Super Air Nozzle and Chip Shield

Model HP1330SS-CS Heavy Duty Safety Air Gun with Chip Shield

Nozzle: HP1122SS Stainless Steel 2" High Power Flat Super Air Nozzle

Model HP1330SS-CS Heavy Duty Safety Air Gun with Chip Shield
Inlet: 3/8 FNPT
Air Consumption Force* Sound Level
SCFM SLPM Lbs Grams dBA
37 1,039 2.2 998 83

Also available:

HP1330-CS with HP1122 Zinc Aluminum 2" High Power Super Air Nozzle and Chip Shield

Model 1340-CS Heavy Duty Safety Air Gun with Chip Shield

Nozzle: 1111-4 Super Air Nozzle Cluster

Model 1304-cs Heavy Duty Safety Air Gun with Chip Shield
Inlet: 3/8 FNPT
Air Consumption Force* Sound Level
SCFM SLPM Lbs Grams dBA
56 1,585 3.2 1,451 82
 

Model 1360SS-CS Heavy Duty Safety Air Gun with Chip Shield

Nozzle: 1106SS Stainless Steel Super Air Nozzle

Model 1360SS-CS Heavy Duty Safety Air Gun with Chip Shield
Inlet: 3/8 FNPT
Air Consumption Force* Sound Level
SCFM SLPM Lbs Grams dBA
60 1,699 3.3 1,497 87

Also available:

1360-CS with 1106 Zinc Aluminum Super Air Nozzle and Chip Shield

1360-PEEK-CS with 1106-PEEK PEEK plastic Super Air Nozzle and Chip Shield

Model 1306SS-X-CS Heavy Duty Back Blow Safety Air Gun

Nozzle: 1006SS Stainless Steel Back Blow Air Nozzle, 6" Aluminum Extension, and Chip Shield

Model 1306SS-X-CS Heavy Duty Back Blow Safety Air Gun
Inlet: 3/8 FNPT
Air Consumption Sound Level Use With:
SCFM SLPM dBA Inside Diameter
22 622 80

7/8" - 4"

(22-102mm)

spacer

*Force measured at 12" (305mm) from target. Sound level measured at 3' (914mm). All measurements taken at 80 PSIG (5.5 BAR).

Safety Air Gun Standards and Certifications

CE Compliant OSHA Safe!

EXAIR Safety Air Guns comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC).All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Caution WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Selecting the Right Safety Air Gun

EXAIR offers six different styles of Safety Air Gun to meet your production needs:

VariBlast Precision Safety Air Gun

VariBlast® Precision Safety Air Gun - is extremely lightweight and the most comfortable to operate during long periods of extended use. It features a variable trigger valve which produces varying force levels depending on trigger valve pressure. You decide how much force is needed for the application by squeezing the trigger a little or all the way for maximum force!

VariBlast Compact Safety Air Gun

VariBlast® Compact Safety Air Gun - is a uniquely powerful gun which produces variable force and airflow depending on trigger valve pressure. You decide how much force is needed for the application by squeezing the trigger a little or all the way for maximum force! It has a comfortable cast aluminum body suitable for smaller hands.

Soft Grip Safety Air Gun

Soft Grip Safety Air Gun - has a durable cast aluminum body that is suited for rugged industrial use. The ergonomic design has a large trigger for easy operation and a convenient hanger hook for easy storage.

Heavy Duty Safety Air Gun

Heavy Duty Safety Air Gun - has a heavy duty cast aluminum body that can deliver more powerful blowing force and performs great in a high-demand environment. The ergonomic composite rubber grip and wide curved trigger can be used for hours without fatigue.

TurboBlast Safety Air Gun

TurboBlast Safety Air Gun - extraordinary, ergonomic guns which produce very high airflow and force up to 23 pounds. A soft grip houses a one finger, button trigger which activates a powerful and adjustable airflow which can be dialed in for specific applications. Capable of removing slag and stubborn debris, flash, green sand and more.

Super Blast Safety Air Gun

Super Blast Safety Air Gun - provides the strongest blowing force. It's ideal for long distance, wide area blowoff, cooling, and drying applications. It has a foam rubber handle that provides a comfortable firm grip. A spring-loaded ball valve instantly shuts off the air supply if the air gun is dropped.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top