Model 6192 Vac-u-Gun Collection System

EXAIR's Model 6192 Vac-u-Gun Collection System is a portable, lightweight, easy-to-use, small job vacuum tool that can also be used as
Model
6192
$167.00

View More
EXAIR's Model 6192 Vac-u-Gun Collection System is a portable, lightweight, easy-to-use, small job vacuum tool that can also be used as a transfer tool or blow gun. A low cost solution to a wide variety of industrial housekeeping problems. The Vac-u-Gun has durable die cast construction with no moving parts to wear out.

Applications

  • Vacuum shavings
  • Vacuum absorbent
  • Vacuum sawdust
  • Vacuum spills
  • Transfer small parts
  • Transfer pellets
  • Transfer trim
  • Blow chips
  • Blow water
  • Blow coolant
  • Blow scrap

Advantages

  • Low cost
  • No moving parts – maintenance free
  • Durable – die cast construction
  • Switch from vacuum to blow mode in seconds
  • Safe – no electricity
  • Meets OSHA pressure requirements
  • Vacuum or blowoff
  • Lightweight and portable
  • Versatile

Vac-u-Gun Styles

Vac-u-Gun Collection System

Model 6192 Collection System is designed to make your Vac-u-Gun a lightweight, easy-to-use vacuum tool. It includes the Vac-u-Gun, reusable bag, brush, crevice tool, skimmer tool and two extension wands.

Vac-u-Gun Transfer System

Model 6292 Transfer System is designed to turn your Vac-u-Gun into a handy, lightweight transfer tool. It includes the Vac-u-Gun, 10' (3m) of vacuum hose at 1-1/2" (38mm) I.D., brush, crevice tool, skimmer tool and two extension wands.

Vac-u-Gun All Purpose System

Model 6392 All Purpose System makes it easy to use your Vac-u-Gun as a lightweight vacuum or handy transfer tool. It includes the Vac-u-Gun, a reusable bag, 10' (3m) of vacuum hose at 1-1/2" (38mm) I.D., brush, crevice tool, skimmer tool and two extension wands.

What's Included

  • Vac-u-Gun
  • Reusable bag
  • Brush
  • Crevice tool
  • Skimmer tool
  • Two extension wands

Vac-u-Gun Performance

Pressure SupplyAir ConsumptionVacuumForceInletSound Level
PSIGBARSCFMSLPM"H2OkPaOzsGramsNPTdBA
805.513368-29.5-792551/484*
*tested in "vacuum" mode with bag attached

How the Vac-u-Gun Works

How EXAIR's Vac-u-Gun Works

Compressed air, normally 80-100 PSlG (5.5 - 6.9 BAR), flows through the inlet into an annular plenum chamber. Airflow is injected into the throat of the gun through directed nozzles. These jets of air create a vacuum at the intake which draws material in and accelerates it through the unit. The chips, debris or other particulates can then be exhausted into a filter bag or hose attached to the Vac-u-Gun System.

Vac-u-Gun Standards and Certifications

OSHA Safe!
CE Compliant

EXAIR Vac-u-Guns comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Selecting the Right EXAIR Industrial Vacuum

EasySwitch Wet-Dry Vac

EXAIR’s patent pending EasySwitch Wet-Dry Vac simplifies the filter change process when switching from vacuuming a dry material to a liquid or vice versa. Utilizing minimal compressed air, the EasySwitch is a powerful pneumatic vacuum that is ideal for any application - wet, dry, light and heavy. It rests upon any 55 gallon drum.

Chip Vac family

Chip Vac picks up dry or wet chips and delivers them directly to an ordinary drum. It is used to clean chips from fixtures, machines, parts and work surfaces. The lid can be moved easily from drum to drum to materials separate from recycling. Available in 5, 30, 55 and 110 gallon capacities.

Reversible Drum Vac

The Reversible Drum Vac is a two-way liquid vacuum that can fill or empty a 55 gallon drum in 90 seconds! It is ideal for spill recovery and filling or emptying coolant sumps. It has no moving parts to wear out. Available in 5, 30, 55 and 110 gallon capacities.

Deluxe Reversible Drum Vac System

High Lift Reversible Drum Vac is a two-way liquid vacuum that can fill or empty a 55 gallon drum in just 85 seconds from 15 feet! Its powerful pump provides the high lift needed to fill or empty below grade coolant sumps, pits and cisterns. Available in 30, 55 and 110 gallon capacities.

Heavy Duty Dry Vac family

The Heavy Duty Dry Vac turns an ordinary drum into a powerful, industrial duty vacuum cleaner. It vacuums more dry materials in less time than ordinary vacs. It is ideal for vacuuming abrasives like steel shot, garnet, metal chips and sand. Available in 30, 55 and 110 gallon capacities.

Heavy Duty HEPA Vac family

Heavy Duty HEPA Vac is a rugged HEPA quality vacuum with high capacity cleaning for dusty environments. It is powerfully designed to move more material with less wear. In addition, the Heavy Duty HEPA Vac has been engineered to filter contaminants to HEPA requirements. Available in 30, 55 and 110 gallon capacities.

Chip Trapper family

The Chip Trapper offers a fast, easy way to clean solids such as chips, swarf and shavings out of used coolants and other liquids. It is ideal for use on machines with sumps, parts washers, tanks and storage containers. Available in 30, 55 and 110 gallon capacities.

High Lift Chip Trapper family

High Lift Chip Trapper has additional power to clean liquids from solids at greater distances or deeper depths like below grade sumps and cisterns. It efficiently separates solids like chips, swarf and metal shavings out of used coolants and other liquids. It is also capable of moving high viscosity liquids of up to 1400 centipoise! Available in 30, 55 and 110 gallon capacities.

Vac-u-Gun

Vac-u-Gun is a vacuum gun, blowoff gun, and transfer tool all-in-one. It is commonly used to vacuum sawdust and shavings and to transfer small parts and pellets. It is also used to blow away water, chips and coolant. Available in three systems.

Deep Hole Vac-u-Gun

Deep Hole Vac-u-Gun is a vacuum gun that was engineered to blow chips loose and vacuum them away in one easy step. It is ideal for cleaning cavities, grooves, containers and drilled holes. It has no moving parts to wear out.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top