Adjustable E-Vacs Hold Different Size Sheets Consistently For Machining
This customer was using a 1 HP blower motor to pull a vacuum to hold a sheet of Styrofoam in place while it was being machined. The system was designed for one size, though, and did not hold sheets of other sizes very well. Often, these would come loose during machining, causing an unacceptable level of scrapped parts. A new vacuum clamping system was designed, incorporating an array of Adjustable E-Vac Vacuum Generators, pulling a vacuum on a grid which accommodated all the sizes they needed. Then, they would simply turn the needed generators on to securely hold any size sheet.
-
Model 802017 16.8 SCFM E-Vac Low Vacuum Generator Deluxe Kit (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Deluxe Kits provide the tools to fine tune your vacuum system and ensure a clean supply of air. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. Learn More$1,303.00
-
Model 802002M 2.1 SCFM E-Vac Low Vacuum Generator Deluxe Kit with Straight Through Muffler (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Deluxe Kits provide the tools to fine tune your vacuum system and ensure a clean supply of air. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. Learn More$843.00
-
Model 810003H 3.3 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$126.00
-
Model 810008H 8.4 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$179.00
-
Model 810013M 13.2 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$223.00
-
Model 810006H 6.2 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$126.00
-
Model 810031H 30.8 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$410.00
-
Model 810013H 13.2 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$207.00
-
Model 810003M 3.3 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$139.00
-
Model 810031M 30.8 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$446.00