Adjustable Spot Cooler Cools Fiberglass Saw Blades
Application is in a fiberglass insulation factory where the customer wants to cool two 700 mm diameter batt cutting blades. The problem is when they are cutting thick batts, the blade gets very hot and warps. The warping ruins the blades and they must be changed at a large expense of time and money. They currently have two small cooling tubes affixed to each saw blade guard, but they are not providing enough volume nor cold enough air to cool the blade properly. A Model 3725 Adjustable Spot Cooler was installed onto each saw blade guard. The Adjustable Spot Coolers were set to output a temperature of zero degrees Celsius. The volume of flow plus the temperature of the air was adequate to allow the customer to continue the cutting application without any further heat damage or warping of the cutting blades.
-
Model 3901 Cold Muffler for 10-40 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$51.00 -
Model 3908 Cooling Kit (Up to 550 Btu/hr.)If you are unsure of your flow and temperature requirements, EXAIR recommends the purchase of an EXAIR Cooling Kit. It contains a vortex tube, cold air muffler, air line filter and all generators required to experiment with the full range of airflows and temperatures. Model 3908 for up to 550 Btu/hr. (139 Kcal/hr.). Temperatures adjustable from -50 to +260 Fahrenheit. Learn More$457.00 -
Model 3998 Cooling Kit (Up to 10,200 Btu/hr.)This kit includes the large Vortex Tube and all interchangeable generator sets for cooling rates up to 10,200 Btu/hr (2,570 kcal/hr.) The filter, cold air muffler, hose and clips are also included. Vortex Tubes convert an ordinary supply of compressed air into two streams; one hot and one cold. Applications include cooling hot melts, cutting tools, welding horns, electronic controls, soldered parts and gas samples. Temperatures adjustable from -50°F to +250°F.
Learn More$2,086.00 -
Model 3825 Adjustable Spot Cooler System (one cold outlet)EXAIR's Adjustable Spot Cooler System (one cold outlet) includes everything needed for a single point cooling station that offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$680.00 -
Model 3925 Adjustable Spot Cooler System (two cold outlets)EXAIR's Adjustable Spot Cooler System (two cold outlets) includes everything needed for a dual point cooling station that offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature.
Learn More$695.00