Cold Gun Cools Runner on Plastic Mold to Aid Part Removal
A plastic injection molder makes a certain part that has a "runner" left on it. When the part is pulled from the mold by a robot, it is still hot, and the runner simply stretches instead of pulling off of the part. EXAIR provided a Model 5315 Cold Gun Aircoolant System with two cold outlets to provide a blast of cold air, which cools the runner, and enables it to be removed cleanly.
-
Model 5901 Single Point Hose Kit for Cold GunFlexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 11" long. Learn More$32.00 -
Model 5030 High Power Cold Gun OnlyThe Cold Gun Only (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. The Cold Gun Only is shipped without the hose kit or filter/separator which is included in other Cold Gun Systems. Learn More$360.00 -
Model 5330 High Power Cold Gun System (Two Cold Outlets)The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator. Learn More$508.00 -
Model 5902 Dual Point Hose Kit for Cold GunFlexible Dual Point Hose Kit, recommended when heat is generated over a larger surface area. Dual Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 11" long. Learn More$45.00 -
Model 5215 Standard Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$424.00 -
Model 5315 Standard Cold Gun System (Two Cold Outlets)The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator. Learn More$436.00 -
Model 5015 Standard Cold Gun OnlyThe Cold Gun Only (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. The Cold Gun Only is shipped without the hose kit or filter/separator which is included in other Cold Gun Systems. Learn More$360.00 -
Model 5230 High Power Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$496.00