Cold Gun Prevents Out of Tolerance Parts

Customer is producing shot gun shells with plastic housings. A ½" section of the end of the plastic tube is skived internally to make a thinner wall of the tube which is folded inward to close the top of the shot gun shell after it is loaded. The skiving process is heating up the plastic tube and they are having difficulties maintaining tolerances. They have purchased a Model 5330 High Power Cold Gun with Dual Hose Outlet to blow cold air onto the tube to keep it from heating up and losing tolerance during the skiving process.

  1. The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator.
    $629.00
  2. The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator.
    $537.00
  3. The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator.
    $613.00
Back To Top
Loading...