Cooling a Chuck For An Interference Fit

A company manufactures cutting tools. They make an interference fit tool chuck to accept a tool. They heat the ID of the chuck to expand it so it will accept the tool. The water cooling system that was in place would not accommodate some of their tool configurations. The low cost Model 120022 2" (51mm) Super Air Amplifier allowed them to design several cooling stations. This freed up the tool seating fixture to do another tool while the others were cooling, increasing production as well as the ability to do all of their tool configurations.

  1. Model 120022 2" Alum. Super Air Amplifier
    Applications
    Model 120022 2" Alum. Super Air Amplifier
    Using a small amount of compressed air as their power source, Super Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows to circulate air, move smoke, fumes and light materials. Also effective to cool, clean and dry parts or processes.
    $311.00
  2. Model 120222 2" Alum. Super Air Amplifier Kit
    Applications
    Model 120222 2" Alum. Super Air Amplifier Kit
    Super Air Amplifier Kits include a Super Air Amplifier, shim set, filter separator and pressure regulator (with coupler). Using a small amount of compressed air as their power source, Super Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows.
    $632.00
  3. Model 120024 4" Alum. Super Air Amplifier
    Applications
    Model 120024 4" Alum. Super Air Amplifier
    Using a small amount of compressed air as their power source, Super Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows to circulate air, move smoke, fumes and light materials. Also effective to cool, clean and dry parts or processes.
    $778.00
Back To Top
Loading...