Eliminating Condensation on a Glass Vision Port for Flue Gas Monitoring
The customer manufactures what are called "cross stack monitors". These monitors are placed across the exhaust stacks for a variety of industrial applications. The cross-stack monitors use a laser to shoot through the material in the stack. To do this, a vision port is installed on opposite sides of the stack. The problem is that condensation will usually form on the inside of the vision port. So, the customer is using the hot end of a Model 3210 Vortex Tube to purge the inspection port. This unit works very well to keep condensation from forming on the inspection port so the laser can make accurate readings. Before installing the Vortex Tube hot air purge, the customer was dealing with constant mis-reads with their system.
-
Model 3905 Cold Muffler for 2-8 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$47.00
-
Model 3808 Mini Cooler System, One Cold OutletEXAIR's Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Learn More$443.00
-
Model 3725 Adjustable Spot Cooler onlyEXAIR's compressed air powered Adjustable Spot Cooler offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$447.00
-
Model 3499 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3499 is 150 SCFM.
Learn More$1,342.00 -
Model 3498 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3498 is 100 SCFM.
Learn More$1,342.00 -
Model 3475 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3475 is 75 SCFM.
Learn More$1,342.00 -
Model 3450 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3450 is 50 SCFM.
Learn More$1,342.00 -
Model 3440 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3440 is 40 SCFM.
Learn More$292.00 -
Model 3408 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3408 is 8 SCFM.
Learn More$240.00 -
Model 3275 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3275 is 75 SCFM.
Learn More$1,342.00 -
Model 3250 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3250 is 50 SCFM.
Learn More$1,342.00 -
Model 3240 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3240 is 40 SCFM.
Learn More$292.00 -
Model 3230 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3230 is 30 SCFM.
Learn More$292.00 -
Model 3225 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3225 is 25 SCFM.
Learn More$292.00 -
Model 3215 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3215 is 15 SCFM.
Learn More$292.00 -
Model 3210 Vortex Tube
EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3210 is 10 SCFM.
Learn More$292.00