Getting Out of a Jam With a Line Vac

The customer is in a big hurry to source a piece of equipment to unload plastic pellets from a large container truck, up and into a main silo to feed his injection molding plant. The customer needs about 1000 lbs./hr. transfer rate into the main silo. The customer had no other reasonable way to get the plastic pellets transferred to his silo and needed a quick and dirty solution, emphasis on the quick turnaround. Model 6084 2" (51mm) Aluminum Line Vac was purchased to get them out of a tight spot and get the job done.

Shop By
Back To Top