Hot Air From Vortex Tube Aids In Drying Material
This customer manufactures aircraft/aerospace parts and equipment. One of their products includes a strand of flexible, porous material that is continuously passed through a wash tank prior to cutting. They were interested in speeding the drying of this strand, and considered blowing hot air onto it. It was not feasible to install an electrically powered hot air blower or gun. They needed an air flow of approximately 15 SCFM @200°F, and had 70psig compressed air available. A Model 3275 Large Vortex Tube (Maximum Cooling Power, 75 SCFM, 5,100 Btu/hr) was specified. Set at a 70% Cold Fraction (meaning 30% of the air supply is directed to the Hot End,) they are able to provide (actually, slightly exceed) the originally specified flow and temperature, effectively drying the product, quickly and safely.
-
Model 3450 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3450 is 50 SCFM.
Learn More$1,409.00 -
Model 3440 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3440 is 40 SCFM.
Learn More$307.00 -
Model 3430 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3430 is 30 SCFM.
Learn More$307.00 -
Model 3408 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3408 is 8 SCFM.
Learn More$252.00 -
Model 3275 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3275 is 75 SCFM.
Learn More$1,409.00 -
Model 3250 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3250 is 50 SCFM.
Learn More$1,409.00 -
Model 3240 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3240 is 40 SCFM.
Learn More$307.00 -
Model 3230 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3230 is 30 SCFM.
Learn More$307.00 -
Model 3225 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3225 is 25 SCFM.
Learn More$307.00 -
Model 3215 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3215 is 15 SCFM.
Learn More$307.00