In-Line High Vacuum E-Vac solves workholding problem in tool and die shop

A tool & die shop was designing a workholding fixture to hold a raw block of steel during a series of complex machining, drilling, and cutting evolutions. The fixture consisted of two flat surfaces with o-ring sealed vacuum ports that were at an angle corresponding to the flat surfaces of the block that weren't being worked. A Model 810023M In-Line High Vacuum E-Vac Vacuum Generator was selected to pull vacuum on those ports, holding the block securely.
  1. These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA).
    $329.90
  2. These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA).
    $290.90
Back To Top
Loading...