NEMA 4X Cabinet Cooler System solves heat problem with outdoor electrical panel

A plastics manufacturer needed a cooling solution for a control panel being provided with a new dust collection system. It's a relatively small panel and is installed on the roof of the building, so a refrigerant-type panel a/c system would be a complicated installation. They chose, instead, a Model 4808SS-316 NEMA 4X 316SS Cabinet Cooler System - 550 Btu/hr - with Thermostat Control. It was installed in minutes, prior to the mounting of the control panel, and all that was required for operation was running a compressed air line to it.

Model 4808SS-316 NEMA 4X 550 Btu/hr 316 St. St. Cabinet Cooler w Therm

NEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More

$2,303.00