Panel Blow Off
Customer makes wooden doors. To prep the doors before going into painting they blow them off with an air knife. The air knives worked so well that they wanted to convert several more lines but they were out of compressed air. Using a Model 9056 Electronic Flow Control they saved enough compressed air that they were able to retrofit another line without adding compressed air capacity.
-
Model 9056 100 SCFM Electronic Flow Control
EXAIR's EFC is a user-friendly electronic flow control for compressed air that is designed to minimize compressed air use on blowoff, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present.
Learn More$1,803.00 -
Model 9057 200 SCFM Electronic Flow Control
EXAIR's EFC is a user-friendly electronic flow control for compressed air that is designed to minimize compressed air use on blowoff, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present.
Learn More$1,894.00 -
Model 9064 350 SCFM Electronic Flow Control
EXAIR's EFC is a user-friendly electronic flow control for compressed air that is designed to minimize compressed air use on blowoff, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present.
Learn More$2,007.00