Saving Compressed Air to Gain Compressor Capacity
Company manufactures metal stampings. This customer has air leaks on their stamping press but cannot pinpoint them because they can only be detected when the press is in motion, thus making it inaccessible to an operator to get close enough to detect where the leaks are coming from. The leaks were so severe that their compressor could not keep up. Using the Model 9061 Ultrasonic Leak Detector which can detect leaks from a distance, they were able to locate all the leaks on the machine and repair them. This saved them enough air consumption that the air compressor was finally able to keep up and they were able to go into full production.
-
Model 9207 Ultrasonic Leak Detector
The Model 9207 Ultrasonic Leak Detector (ULD) is a hand-held, high quality instrument that can locate costly leaks in a compressed air system.
Learn More$868.00 -
Model 9056 100 SCFM Electronic Flow Control
EXAIR's EFC is a user-friendly electronic flow control for compressed air that is designed to minimize compressed air use on blowoff, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present.
Learn More$1,875.00 -
Model 9055 40 SCFM Electronic Flow Control
EXAIR's EFC is a user-friendly electronic flow control for compressed air that is designed to minimize compressed air use on blowoff, drying, cooling, conveying and static elimination operations. The EFC combines a photoelectric sensor with a timing control that limits compressed air use by turning it off when no part is present.
Learn More$1,644.00