Spill Prevention
Company manufactures industrial cleaning equipment. When changing out hydraulic lines on their equipment it necessitates draining the hydraulic reservoirs to prevent fluid from pouring out when they make a disconnect. Installing the Model 800001 Low Vacuum E-Vac Vacuum Generator onto the vent port on the reservoir housing, they were able to impart just enough vacuum to hold the fluid in while they disconnect the lines and changed them out. This not only saved labor but prevented spillage and a housekeeping issue.
-
Model 801003H 3.1 SCFM E-Vac Low Vacuum Generator Kit with Standard Muffler (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Kits provide the tools to fine tune your vacuum system. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are available. There are 7 In-Line models that vary by flow and vacuum level. Learn More$422.00 -
Model 811013H 13.2 SCFM E-Vac High Vacuum Generator Kit with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. Kits include vacuum cups, vacuum fittings and vacuum tube. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$539.00 -
Model 810013M 13.2 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$176.00 -
Model 800001M 1.5 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials Learn More$108.00 -
Model 812008H 8.4 SCFM E-Vac High Vacuum Generator Deluxe Kit with Standard Muffler (Non-Porous)Deluxe kits add a filter separator and pressure regulator with the included E-Vac, vacuum cups, vacuum fittings and vacuum tube. These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$731.00 -
Model 811003M 3.3 SCFM E-Vac High Vacuum Generator Kit with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. Kits include vacuum cups, vacuum fittings and vacuum tube. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$430.00 -
Model 802008H 8.4 SCFM E-Vac Low Vacuum Generator Deluxe Kit with Standard Muffler (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Deluxe Kits provide the tools to fine tune your vacuum system and ensure a clean supply of air. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. Learn More$752.00 -
Model 800017M 16.8 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials Learn More$352.00 -
Model 812023M 23.1 SCFM E-Vac High Vacuum Generator Deluxe Kit with Straight Through Muffler (Non-Porous)Deluxe kits add a filter separator and pressure regulator with the included E-Vac, vacuum cups, vacuum fittings and vacuum tube. These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$949.00 -
Model 800005 5.4 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level. Learn More$122.00 -
Model 802005H 5.4 SCFM E-Vac Low Vacuum Generator Deluxe Kit with Standard Muffler (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Deluxe Kits provide the tools to fine tune your vacuum system and ensure a clean supply of air. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. Learn More$731.00 -
Model 801003M 3.1 SCFM E-Vac Low Vacuum Generator Kit with Straight Through Muffler (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Kits provide the tools to fine tune your vacuum system. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are available. There are 7 In-Line models that vary by flow and vacuum level. Learn More$430.00