Spill Prevention
Company manufactures industrial cleaning equipment. When changing out hydraulic lines on their equipment it necessitates draining the hydraulic reservoirs to prevent fluid from pouring out when they make a disconnect. Installing the Model 800001 Low Vacuum E-Vac Vacuum Generator onto the vent port on the reservoir housing, they were able to impart just enough vacuum to hold the fluid in while they disconnect the lines and changed them out. This not only saved labor but prevented spillage and a housekeeping issue.
-
Model 802017 16.8 SCFM E-Vac Low Vacuum Generator Deluxe Kit (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Deluxe Kits provide the tools to fine tune your vacuum system and ensure a clean supply of air. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. Learn More$1,242.00 -
Model 802002M 2.1 SCFM E-Vac Low Vacuum Generator Deluxe Kit with Straight Through Muffler (Porous)EXAIR's In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use and In-Line E-Vac Deluxe Kits provide the tools to fine tune your vacuum system and ensure a clean supply of air. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (91 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. Learn More$803.00 -
Model 810003H 3.3 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$120.00 -
Model 810008H 8.4 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$171.00 -
Model 810013M 13.2 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$212.00 -
Model 810006H 6.2 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$120.00 -
Model 810031H 30.8 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$391.00 -
Model 810013H 13.2 SCFM E-Vac High Vacuum Generator with Standard Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$197.00 -
Model 810003M 3.3 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$132.00 -
Model 810031M 30.8 SCFM E-Vac High Vacuum Generator with Straight Through Muffler (Non-Porous)These single stage, cylindrical units are compact and easy to mount at the point of use. High vacuum units up to 27" Hg (91 kPa) with vacuum flows up to 15.8 SCFM (447 SLPM) are typically used for non-porous materials such as glass, steel sheet and plastic. Optional silencing mufflers are available. The Standard Muffler has a closed end and is suitable for applications that are free of dust and debris. The Straight Through Muffler is recommended where particulates are present since it will not accumulate debris that can erode performance. Straight Through Mufflers offer the best sound level reduction (up to 26 dBA). Learn More$425.00