Internal Mix 360 Degree Hollow Circular Pattern Air Atomizing Nozzle

EXAIR's 1/4 FNPT and 1/2 FNPT internal mix 360° nozzles are designed for applications where the spray pattern must be oriented away
Only %1 left

View More
EXAIR's 1/4 FNPT and 1/2 FNPT internal mix 360° nozzles are designed for applications where the spray pattern must be oriented away from the nozzle in all directions. 360° nozzles are ideal where a smooth, even coating is needed on the inside of pipe or similar ductwork. They also work great for operations where a mist over a broad area is needed, such as dust suppression, humidification and cooling. For pressure fed applications not requiring independent air and liquid control.

Applications

  • Washing
  • Rinsing
  • Coating
  • Cooling
  • Quenching
  • Wetting (moistening)
  • Humidification
  • Dust Control

Advantages

  • Fully adjustable
  • Maximizes liquid dispersion
  • Minimizes liquid consumption
  • All stainless steel construction
  • Compact
  • Versatile
  • Interchangeable liquid and air caps
  • Minimizes air consumption
  • Fine atomization

Atomizing Nozzle Materials

Type 303 Stainless Steel - All of EXAIR's Atomizing Nozzles are constructed with Type 303 stainless steel, which can resist high temperatures and corrosive environments. They are designed for environments with a maximum operating temperature of 800°F (426°C).

Accessories

Mounting bracket for 1/4 NPT Atomizing NozzlesMounting bracket for 1/2 NPT Atomizing Nozzles

Mounting Brackets - available for 1/8 FNPT, 1/4 FNPT and 1/2 FNPT models. Provides a secure mount for EXAIR's Atomizing Nozzles. Constructed of Type 301 stainless steel.

Dimensions & Performance

Internal Mix 360° Hollow Circular Pattern Atomizing Nozzles

(1/4 FNPT Model)

Dimensions - 1/4 FNPT Internal Mix 360 Degree Hollow Circular Pattern Atomizing Nozzle

Liquid Pressure

 

AT1010SS

10 PSI / 0.7 BAR Air Pressure PSI 20 24 26 28
BAR 1.4 1.7 1.8 1.9
Liquid Flow GPH 4.5 2.6 2.0 1.6
LPH 16.8 9.7 7.5 5.9
Air Flow SCFM 4.3 5.3 5.7 6.2
SLPM 121 150 162 176
20 PSI / 1.4 BAR Air Pressure PSI 34 38 42 48
BAR 2.3 2.6 2.9 3.3
Liquid Flow GPH 7.3 5.2 3.6 2.1
LPH 27.5 19.6 13.5 7.8
Air Flow SCFM 6.4 7.3 8.2 9.3
SLPM 182 206 231 264
30 PSI / 2.1 BAR Air Pressure PSI 50 56 60 70
BAR 3.4 3.9 4.1 4.8
Liquid Flow GPH 8.1 5.4 4.2 2.0
LPH 30.6 20.3 15.7 7.4
Air Flow SCFM 8.9 10.0 10.7 12.6
SLPM 251 285 303 356
40 PSI / 2.8 BAR Air Pressure PSI 60 70 80 90
BAR 4.1 4.8 5.5 6.2
Liquid Flow GPH 11.5 7.1 4.1 2.0
LPH 43.5 26.8 15.4 7.7
Air Flow SCFM 10.0 11.8 13.5 15.5
SLPM 283 335 383 439
60 PSI / 4.1 BAR Air Pressure PSI 85 90 95 100
BAR 5.9 6.2 6.6 6.9
Liquid Flow GPH 14.7 12.7 10.6 8.9
LPH 55.7 47.9 40.2 33.7
Air Flow SCFM 13.3 14.1 14.9 15.8
SLPM 376 398 423 449

Dimensions & Performance

Internal Mix 360° Hollow Circular Pattern Atomizing Nozzles

(1/2 FNPT Models)

Dimensions - 1/2 FNPT Internal Mix 360 Hollow Circular Pattern Atomizing Nozzle

Liquid Pressure

 

AT5010SS

10 PSI / 0.7 BAR Air Pressure PSI 14 16 18 20
BAR 1.0 1.1 1.2 1.4
Liquid Flow GPH 54 33.6 16.8 10.8
LPH 204 127 64 41
Air Flow SCFM 13.7 16.3 18.5 20.0
SLPM 388 462 524 566
20 PSI / 1.4 BAR Air Pressure PSI 24 28 32 36
BAR 1.7 1.9 2.2 2.5
Liquid Flow GPH 100 66 32.5 12
LPH 379 250 123 45
Air Flow SCFM 17.3 21.8 26.7 30.8
SLPM 490 617 756 872
30 PSI / 2.1 BAR Air Pressure PSI 36 40 46 50
BAR 2.5 2.8 3.2 3.4
Liquid Flow GPH 114 83 38.4 14.4
LPH 431 314 145 55
Air Flow SCFM 23.7 28.0 34.6 39.1
SLPM 671 793 980 1107
40 PSI / 2.8 BAR Air Pressure PSI 48 54 60 66
BAR 3.3 3.7 4.1 4.6
Liquid Flow GPH 132 85 42 15.6
LPH 500 322 159 59
Air Flow SCFM 29.6 36.2 42.7 49.9
SLPM 838 1025 1209 1413
60 PSI / 4.1 BAR Air Pressure PSI 72 76 78 82
BAR 5.0 5.2 5.4 5.7
Liquid Flow GPH 150 120 108 84
LPH 568 454 409 318
Air Flow SCFM 41.5 45.6 47.9 51.5
SLPM 1175 1291 1357 1458

Spray Dimensions

Internal Mix 360° Hollow Circular Pattern Atomizing Nozzle

(1/4 FNPT Models)

Spray Dimensions - 1/4 FNPT Internal Mix 360 Hollow Circular Pattern Atomizing Nozzle

Model

Air Pressure

Liquid Pressure

Diameter

PSI

BAR

PSI

BAR

in

cm

AT1010SS 20 1.4 10 0.7 36 91
34 2.3 20 1.4 39 99
50 3.4 30 2.1 44 112
60 4.1 40 2.8 49 124
85 5.9 60 4.1 53 135

Spray Dimensions

Internal Mix 360° Hollow Circular Pattern Atomizing Nozzle

(1/2 FNPT Models)

Dimensions - 1/2 FNPT Internal Mix 360 deg Hollow Circular Pattern Atomizing Nozzle

Model

Air Pressure

Liquid Pressure

Diameter

PSI

BAR

PSI

BAR

in

cm

AT5010SS 16 1.1 10 0.7 56 142
42 2.9 30 2.1 112 284
56 3.9 40 2.8 144 366
80 5.5 60 4.1 156 396

Atomizing Nozzle Standards and Certifications

CE Compliant

EXAIR Atomizing Nozzles comply with the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Caution WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Awards - Internal Mix Atomizing Nozzle

2011 New Equipment Digest King Award Winner

EXAIR's Internal Mix Atomizing Nozzles were a winner of the 2011 New Equipment Digest King Awards. The Internal Mix Atomizing Nozzle family won in the Fluid/Pneumatic Power category.

2011 Plant Engineering Product of the Year Award

EXAIR's Internal Mix Atomizing Nozzles were a finalist in the 2011 Plant Engineering Product of the Year Awards. The Internal Mix Atomizing Nozzle family placed in the Fluid Handling category.

Droplet Size

Droplet size illustration

One of the primary reasons atomizing spray nozzles are used is because of their fine droplet size. Benefits of fine droplet size include even coating and liquid conservation. For reference, a large raindrop is around 6,000 microns (0.236") in diameter. Standard liquid nozzles produce droplet sizes ranging from 4,000 microns (0.157") down to 300 microns (0.012") in diameter. EXAIR's Atomizing Nozzles produce minuscule droplet sizes in the range of 100 microns (0.004") to 20 microns (0.0008")!

Droplet Size

ModelLiquid PressureAir PressureDroplet Size (μm*)
AN1020SS20PSI40 PSI71
40PSI65 PSI83
ER1020SS5 PSI40 PSI39
20 PSI40 PSI57
SR1020SS4" Siphon Height20 PSI25
4" Siphon Height40 PSI22

*Volume Median Diameter Dv(50.0) of liquid droplets.

1μ = 1 micron = 0.00004".

All tests performed with water.

Spray Angle

Spray angle illustration

The Spray Angle is the trigonometric angle created by the width of the spray pattern and the distance at which it is measured. This angle can vary greatly within a given family of atomizing nozzles depending on flow rates and pressures, but will generally fall into the ranges below:

Spray Angle

Model Family Minimum Angle Maximum Angle
Internal Mix Narrow Angle Round Pattern- AN1010SS, AN2010SS, etc. 20° 45°
Internal Mix Wide Angle Round Pattern- AW1010SS, AW2010SS, etc. 50° 90°
Internal Mix Flat Fan Pattern- AF1010SS, AF2010SS, etc. 50° 120°
External Mix Round Pattern - ER1010SS, ER2010SS, etc. 25° 60°
External Mix Narrow Angle Flat Fan Pattern - EF1010SS, EF2010SS, etc. 35° 70°
External Mix Wide Angle Flat Fan Pattern - EB1010SS, EB2010SS, etc. 50° 105°
Siphon Fed Round Pattern SR1010SS, SR2010SS, etc. 20° 50°
Siphon Fed Flat Fan Pattern SF1010SS, SF2010SS, etc. 50° 100°
Use our Application Assistance Worksheet to submit information about your application. When you submit this information, we will respond with our recommendation for the EXAIR product best suited for the application. Please complete the Application Assistance Worksheet and click submit or print the completed .pdf file and fax it to us at (513) 671-3363. For immediate help, call our Application Engineering Department at 1 800-903-9247.
Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top