On a Standard Air Wipe, compressed air exhausts through a gap which is set with a shim positioned between the cap and the body. The Standard Air Wipe is shipped with a .002" (0.05mm) thick plastic shim installed which works best for most applications. Force and flow may be easily increased by adding shims to open the gap. Shim Sets include (2) each of a .001" (0.03mm), a .003" (0.08mm), and a .004" (0.10mm) thick shim. Shim sets are included with all kits or may be purchased separately.

Systems

Standard Air Wipe Systems
Standard Air Wipes are available in two different model types: Standard Air Wipe Only Standard Air Wipe Kits - includes a Standard Air Wipe, shim set, filter separator and pressure regulator (with coupler). Standard Air Wipe Shim Sets - include (1) each of a .001" (0.03mm) and .004" (0.10mm) thick plastic shim.
I.D.	Standard Air Wipe Only	Standard Air Wipe Kit	Standard Air Wipe Shim Set
1/2" (13mm)	2430	2480	2350
1" (25mm)	2431	2481	2351
2" (51mm)	2432	2482	2352
3" (76mm)	2433	2483	2353
4" (102mm)	2434	2484	2354
5" (127mm)	2435	2485	2355
6" (152mm)	2436	2486	2356
7" (178mm)	2437	2487	2357
9" (229mm)	2439	2489	2359
11" (279mm)	2441	2481	2361

Specifications

How It Works

How the Standard Air Wipe Works

Compressed air flows through an inlet (1) of the Air Wipe into an annular chamber (2). It is then throttled through a small ring nozzle (3) at high velocity. This primary airstream adheres to the Coanda profile (4), which directs it down the angled surface of the Air Wipe. A low pressure area is created at the center (5) inducing a high volume flow of surrounding air into the primary airstream. As the airflow leaves the Air Wipe, it creates a conical 360° ring of air that attaches itself to the surface of the material running through it (6), uniformly wiping the entire surface with the high velocity airflow.

More Info

Efficiency Lab

Application Assistance

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this Product Efficiency Survey to give us the details about your current application and blowoff set up. You can also feel free to contact an Application Engineer for more information at (800) 903-9247 or (513) 671-3322.

After completing the form, your product can be shipped to: Efficiency Lab EXAIR Corporation 11510 Goldcoast Dr. Cincinnati, OH 45249-1621

This offer is available to all customers in the U.S. and Canada only. Some restrictions might apply.

Products must be shipped to EXAIR freight prepaid. EXAIR will pay the return shipping via UPS ground.

If you cannot send in your product, fill out this Product Efficiency Survey to give us the details about your current application and we will estimate the savings for you.

Application Assistance

Use our Application Assistance Worksheet to submit information about your application. When you submit this information, we will respond with our recommendation for the EXAIR product best suited for the application.

Videos

Loading ...

CADs

To download available CADs and use the 3D viewer, please login and select a model.

Resources

Loading ...

Gallery