Model 4870SS-316-240 NEMA 4X 4,800 Btu/hr 316 St. St. Cabinet Cooler w 240V Therm

NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. They save air by activating
Model
4870SS-316-240
$3,873.00
View More
NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. They save air by activating the cooler only when internal temperatures approach critical levels. Thermostat controlled cooler systems are the best option when experiencing fluctuating heat loads caused by environment or seasonal changes. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve for both the vortex tube and cabinet air exhaust. This valve closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. They are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.

Applications

  • Programmable controllers
  • Line control cabinets
  • Motor control centers
  • Relay panels
  • NC/CNC systems
  • Modular control centers
  • CCTV cameras
  • Computer cabinets
  • Cool laser housings
  • Electronic scales

NEMA 4X Cabinet Cooler Advantages

  • Low cost
  • Corrosion resistant in harsh environments
  • Compact
  • Cooling capacities up to 5,600 Btu/hr. (1,411 Kcal/hr.)
  • Quiet
  • Install in minutes
  • Maintain NEMA 4X integrity (IP66)
  • Stabilize enclosure temperature and humidity
  • No CFC's
  • No moving parts - maintenance free
  • Mount in standard electrical knockout
  • Stop nuisance tripping
  • Stop heat damage
  • Eliminate fans and filters
  • Eliminate lost production
  • Stop circuit drift
  • Stop dirt contamination
  • Provide washdown protection

Models

NEMA 4X (IP66) Cabinet Cooler

4604SS275 Btu/hr. (69 Kcal/hr.)
4608SS550 Btu/hr. (139 Kcal/hr.)
4615SS1,000 Btu/hr. (252 Kcal/hr.)
4625SS1,700 Btu/hr. (428 Kcal/hr.)
4630SS2,000 Btu/hr. (504 Kcal/hr.)
4640SS2,800 Btu/hr. (706 Kcal/hr.)

Type 316 Stainless Steel, Cabinet Coolers

4604SS-316275 Btu/hr. (69 Kcal/hr.)
4608SS-316550 Btu/hr. (139 Kcal/hr.)
4615SS-3161,000 Btu/hr. (252 Kcal/hr.)
4625SS-3161,700 Btu/hr. (428 Kcal/hr.)
4630SS-3162,000 Btu/hr. (504 Kcal/hr.)
4640SS-3162,800 Btu/hr. (706 Kcal/hr.)

NEMA 4X (IP66) Cabinet Cooler

4704SS275 Btu/hr. (69 Kcal/hr.)
4708SS550 Btu/hr. (139 Kcal/hr.)
4715SS1,000 Btu/hr. (252 Kcal/hr.)
4725SS1,700 Btu/hr. (428 Kcal/hr.)
4730SS2,000 Btu/hr. (504 Kcal/hr.)
4740SS2,800 Btu/hr. (706 Kcal/hr.)
4750SS3,400 Btu/hr. (857 Kcal/hr.)
4760SS4,000 Btu/hr. (1008 Kcal/hr.)
4770SS4,800 Btu/hr. (1,210 Kcal/hr.)
4780SS5,600 Btu/hr. (1,411 Kcal/hr.)

Type 316 Stainless Steel, Continuous Operation Systems

4704SS-316275 Btu/hr. (69 Kcal/hr.)
4708SS-316550 Btu/hr. (139 Kcal/hr.)
4715SS-3161,000 Btu/hr. (252 Kcal/hr.)
4725SS-3161,700 Btu/hr. (428 Kcal/hr.)
4730SS-3162,000 Btu/hr. (504 Kcal/hr.)
4740SS-3162,800 Btu/hr. (706 Kcal/hr.)
4750SS-3163,400 Btu/hr. (857 Kcal/hr.)
4760SS-3164,000 Btu/hr. (1008 Kcal/hr.)
4770SS-3164,800 Btu/hr. (1,210 Kcal/hr.)
4780SS-3165,600 Btu/hr. (1,411 Kcal/hr.)

NEMA 4X (IP66) Thermostat Control Systems

4804SS275 Btu/hr. (69 Kcal/hr.)
4808SS550 Btu/hr. (139 Kcal/hr.)
4815SS1,000 Btu/hr. (252 Kcal/hr.)
4825SS1,700 Btu/hr. (428 Kcal/hr.)
4830SS2,000 Btu/hr. (504 Kcal/hr.)
4840SS2,800 Btu/hr. (706 Kcal/hr.)
4850SS3,400 Btu/hr. (857 Kcal/hr.)
4860SS4,000 Btu/hr. (1,008 Kcal/hr.)
4870SS4,800 Btu/hr. (1,210 Kcal/hr.)
4880SS5,600 Btu/hr. (1,411 Kcal/hr.)

Type 316 Stainless Steel, Thermostat Control Systems

4804SS-316275 Btu/hr. (69 Kcal/hr.)
4808SS-316550 Btu/hr. (139 Kcal/hr.)
4815SS-3161,000 Btu/hr. (252 Kcal/hr.)
4825SS-3161,700 Btu/hr. (428 Kcal/hr.)
4830SS-3162,000 Btu/hr. (504 Kcal/hr.)
4840SS-3162,800 Btu/hr. (706 Kcal/hr.)
4850SS-3163,400 Btu/hr. (857 Kcal/hr.)
4860SS-3164,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-3164,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-3165,600 Btu/hr. (1,411 Kcal/hr.)

240V, Thermostat Control Systems

4804SS-240240V, 275 Btu/hr. (69 Kcal/hr.)
4808SS-240240V, 550 Btu/hr. (139 Kcal/hr.)
4815SS-240240V, 1,000 Btu/hr. (252 Kcal/hr.)
4825SS-240240V, 1,700 Btu/hr. (428 Kcal/hr.)
4830SS-240240V, 2,000 Btu/hr. (504 Kcal/hr.)
4840SS-240240V, 2,800 Btu/hr. (706 Kcal/hr.)
4850SS-240240V, 3,400 Btu/hr. (857 Kcal/hr.)
4860SS-240240V, 4,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-240240V, 4,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-240240V, 5,600 Btu/hr. (1,411 Kcal/hr.)

240V, Type 316 Stainless Steel, Thermostat Control Systems

4804SS-316-240240V, 550 Btu/hr. (139 Kcal/hr.)
4808SS-316-240240V, 1,000 Btu/hr. (252 Kcal/hr.)
4815SS-316-240240V, 1,700 Btu/hr. (428 Kcal/hr.)
4825SS-316-240240V, 2,000 Btu/hr. (504 Kcal/hr.)
4830SS-316-240240V, 2,000 Btu/hr. (504 Kcal/hr.)
4840SS-316-240240V, 2,800 Btu/hr. (706 Kcal/hr.)
4850SS-316-240240V, 3,400 Btu/hr. (857 Kcal/hr.)
4860SS-316-240240V, 4,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-316-240240V, 4,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-316-240240V, 5,600 Btu/hr. (1,411 Kcal/hr.)

24VDC, Thermostat Control Systems

4804SS-24VDC24VDC, 275 Btu/hr. (69 Kcal/hr.)
4808SS-24VDC24VDC, 550 Btu/hr. (139 Kcal/hr.)
4815SS-24VDC24VDC, 1,000 Btu/hr. (252 Kcal/hr.)
4825SS-24VDC24VDC, 1,700 Btu/hr. (428 Kcal/hr.)
4830SS-24VDC24VDC, 2,000 Btu/hr. (504 Kcal/hr.)
4840SS-24VDC24VDC, 2,800 Btu/hr. (706 Kcal/hr.)
4850SS-24VDC24VDC, 3,400 Btu/hr. (857 Kcal/hr.)
4860SS-24VDC24VDC, 4,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-24VDC24VDC, 4,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-24VDC24VDC, 5,600 Btu/hr. (1,411 Kcal/hr.)

24VDC, Type 316 Stainless Steel, Thermostat Control Systems

4804SS-316-24VDC24VDC, 275 Btu/hr. (69 Kcal/hr.)
4808SS-316-24VDC24VDC, 550 Btu/hr. (139 Kcal/hr.)
4815SS-316-24VDC24VDC, 1,000 Btu/hr. (252 Kcal/hr.)
4825SS-316-24VDC24VDC, 1,700 Btu/hr. (428 Kcal/hr.)
4830SS-316-24VDC24VDC, 2,000 Btu/hr. (504 Kcal/hr.)
4840SS-316-24VDC24VDC, 2,800 Btu/hr. (706 Kcal/hr.)
4850SS-316-24VDC24VDC, 3,400 Btu/hr. (857 Kcal/hr.)
4860SS-316-24VDC24VDC, 4,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-316-24VDC24VDC, 4,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-316-24VDC24VDC, 5,600 Btu/hr. (1,411 Kcal/hr.)

NEMA 4X (IP66) Cabinet Cooler Thermostat Control System with ETC

4804SS-ETC120275 Btu/hr. (69 Kcal/hr.)
4808SS-ETC120550 Btu/hr. (139 Kcal/hr.)
4815SS-ETC1201,000 Btu/hr. (252 Kcal/hr.)
4825SS-ETC1201,700 Btu/hr. (428 Kcal/hr.)
4830SS-ETC1202,000 Btu/hr. (504 Kcal/hr.)
4840SS-ETC1202,800 Btu/hr. (706 Kcal/hr.)
4850SS-ETC1203,400 Btu/hr. (857 Kcal/hr.)
4860SS-ETC1204,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-ETC1204,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-ETC1205,600 Btu/hr. (1,411 Kcal/hr.)

Type 316 Stainless Steel, Thermostat Control Systems with ETC

4804SS-316-ETC120275 Btu/hr. (69 Kcal/hr.)
4808SS-316-ETC120550 Btu/hr. (139 Kcal/hr.)
4815SS-316-ETC1201,000 Btu/hr. (252 Kcal/hr.)
4825SS-316-ETC1201,700 Btu/hr. (428 Kcal/hr.)
4830SS-316-ETC1202,000 Btu/hr. (504 Kcal/hr.)
4840SS-316-ETC1202,800 Btu/hr. (706 Kcal/hr.)
4850SS-316-ETC1203,400 Btu/hr. (857 Kcal/hr.)
4860SS-316-ETC1204,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-316-ETC1204,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-316-ETC1205,600 Btu/hr. (1,411 Kcal/hr.)

240V, Thermostat Control Systems with ETC

4804SS-ETC240275 Btu/hr. (69 Kcal/hr.)
4808SS-ETC240550 Btu/hr. (139 Kcal/hr.)
4815SS-ETC2401,000 Btu/hr. (252 Kcal/hr.)
4825SS-ETC2401,700 Btu/hr. (428 Kcal/hr.)
4830SS-ETC2402,000 Btu/hr. (504 Kcal/hr.)
4840SS-ETC2402,800 Btu/hr. (706 Kcal/hr.)
4850SS-ETC2403,400 Btu/hr. (857 Kcal/hr.)
4860SS-ETC2404,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-ETC2404,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-ETC2405,600 Btu/hr. (1,411 Kcal/hr.)

240V, Type 316 Stainless Steel, Thermostat Control Systems with ETC

4804SS-316-ETC240275 Btu/hr. (69 Kcal/hr.)
4808SS-316-ETC240550 Btu/hr. (139 Kcal/hr.)
4815SS-316-ETC2401,000 Btu/hr. (252 Kcal/hr.)
4825SS-316-ETC2401,700 Btu/hr. (428 Kcal/hr.)
4830SS-316-ETC2402,000 Btu/hr. (504 Kcal/hr.)
4840SS-316-ETC2402,800 Btu/hr. (706 Kcal/hr.)
4850SS-316-ETC2403,400 Btu/hr. (857 Kcal/hr.)
4860SS-316-ETC2404,000 Btu/hr. (1,008 Kcal/hr.)
4870SS-316-ETC2404,800 Btu/hr. (1,210 Kcal/hr.)
4880SS-316-ETC2405,600 Btu/hr. (1,411 Kcal/hr.)

NEMA 4X (IP66) High Temperature Cabinet Cooler Systems

HT4715SS1,000 Btu/hr. (252 Kcal/hr.)
HT4725SS1,700 Btu/hr. (428 Kcal/hr.)
HT4730SS2,000 Btu/hr. (504 Kcal/hr.)
HT4740SS2,800 Btu/hr. (706 Kcal/hr.)
HT4750SS3,400 Btu/hr. (857 Kcal/hr.)
HT4760SS4,000 Btu/hr. (1,008 Kcal/hr.)
HT4770SS4,800 Btu/hr. (1,210 Kcal/hr.)
HT4780SS5,600 Btu/hr. (1,411 Kcal/hr.)

NEMA 4X (IP66) High Temperature Thermostat Control Systems

HT4815SS1,000 Btu/hr. (252 Kcal/hr.)
HT4825SS1,700 Btu/hr. (428 Kcal/hr.)
HT4830SS2,000 Btu/hr. (504 Kcal/hr.)
HT4840SS2,800 Btu/hr. (706 Kcal/hr.)
HT4850SS3,400 Btu/hr. (857 Kcal/hr.)
HT4860SS4,000 Btu/hr. (1,008 Kcal/hr.)
HT4870SS4,800 Btu/hr. (1,210 Kcal/hr.)
HT4880SS5,600 Btu/hr. (1,411 Kcal/hr.)

240V, High Temperature Thermostat Control Systems

HT4815SS-240240V, 1,000 Btu/hr. (252 Kcal/hr.)
HT4825SS-240240V, 1,700 Btu/hr. (428 Kcal/hr.)
HT4830SS-240240V, 2,000 Btu/hr. (504 Kcal/hr.)
HT4840SS-240240V, 2,800 Btu/hr. (706 Kcal/hr.)
HT4850SS-240240V, 3,400 Btu/hr. (857 Kcal/hr.)
HT4860SS-240240V, 4,000 Btu/hr. (1,008 Kcal/hr.)
HT4870SS-240240V, 4,800 Btu/hr. (1,210 Kcal/hr.)
HT4880SS-240240V, 5,600 Btu/hr. (1,411 Kcal/hr.)

24VDC, High Temperature Thermostat Control Systems

HT4815SS-24VDC24VDC, 1,000 Btu/hr. (252 Kcal/hr.)
HT4825SS-24VDC24VDC, 1,700 Btu/hr. (428 Kcal/hr.)
HT4830SS-24VDC24VDC, 2,000 Btu/hr. (504 Kcal/hr.)
HT4840SS-24VDC24VDC, 2,800 Btu/hr. (706 Kcal/hr.)
HT4850SS-24VDC24VDC, 3,400 Btu/hr. (857 Kcal/hr.)
HT4860SS-24VDC24VDC, 4,000 Btu/hr. (1,008 Kcal/hr.)
HT4870SS-24VDC24VDC, 4,800 Btu/hr. (1,210 Kcal/hr.)
HT4880SS-24VDC24VDC, 5,600 Btu/hr. (1,411 Kcal/hr.)

NEMA 4X (IP66) Non-Hazardous Purge Cabinet Coolers

NHP4604SS275 Btu/hr. (69 Kcal/hr.)
NHP4608SS550 Btu/hr. (139 Kcal/hr.)
NHP4615SS1,000 Btu/hr. (252 Kcal/hr.)
NHP4625SS1,700 Btu/hr. (428 Kcal/hr.)
NHP4630SS2,000 Btu/hr. (504 Kcal/hr.)
NHP4640SS2,800 Btu/hr. (706 Kcal/hr.)

Type 316 Stainless Steel, Non-Hazardous Purge Cabinet Coolers

NHP4604SS-316275 Btu/hr. (69 Kcal/hr.)
NHP4608SS-316550 Btu/hr. (139 Kcal/hr.)
NHP4615SS-3161,000 Btu/hr. (252 Kcal/hr.)
NHP4625SS-3161,700 Btu/hr. (428 Kcal/hr.)
NHP4630SS-3162,000 Btu/hr. (504 Kcal/hr.)
NHP4640SS-3162,800 Btu/hr. (706 Kcal/hr.)

NEMA 4X (IP66) Non-Hazardous Purge Thermostat Control System

NHP4804SS275 Btu/hr. (69 Kcal/hr.)
NHP4808SS550 Btu/hr. (139 Kcal/hr.)
NHP4815SS1,000 Btu/hr. (252 Kcal/hr.)
NHP4825SS1,700 Btu/hr. (428 Kcal/hr.)
NHP4830SS2,000 Btu/hr. (504 Kcal/hr.)
NHP4840SS2,800 Btu/hr. (706 Kcal/hr.)
NHP4850SS3,400 Btu/hr. (857 Kcal/hr.)
NHP4860SS4,000 Btu/hr. (1,008 Kcal/hr.)
NHP4870SS4,800 Btu/hr. (1,210 Kcal/hr.)
NHP4880SS5,600 Btu/hr. (1,411 Kcal/hr.)

240V, Non-Hazardous Purge Thermostat Control Systems

NHP4850SS-240240V, 3,400 Btu/hr. (857 Kcal/hr.)
NHP4860SS-240240V, 4,000 Btu/hr. (1,008 Kcal/hr.)
NHP4870SS-240240V, 4,800 Btu/hr. (1,210 Kcal/hr.)
NHP4880SS-240240V, 5,600 Btu/hr. (1,411 Kcal/hr.)

Type 316, Non-Hazardous Purge Thermostat Control Systems

NHP4804SS-316275 Btu/hr. (69 Kcal/hr.)
NHP4808SS-316550 Btu/hr. (139 Kcal/hr.)
NHP4815SS-3161,000 Btu/hr. (252 Kcal/hr.)
NHP4825SS-3161,700 Btu/hr. (428 Kcal/hr.)
NHP4830SS-3162,000 Btu/hr. (504 Kcal/hr.)
NHP4840SS-3162,800 Btu/hr. (706 Kcal/hr.)
NHP4850SS-3163,400 Btu/hr. (857 Kcal/hr.)
NHP4860SS-3164,000 Btu/hr. (1,008 Kcal/hr.)
NHP4870SS-3164,800 Btu/hr. (1,210 Kcal/hr.)
NHP4880SS-3165,600 Btu/hr. (1,411 Kcal/hr.)

240V, Type 316, Non-Hazardous Purge Thermostat Control Systems

NHP4850SS-316-240240V, 3,400 Btu/hr. (857 Kcal/hr.)
NHP4860SS-316-240240V, 4,000 Btu/hr. (1,008 Kcal/hr.)
NHP4870SS-316-240240V, 4,800 Btu/hr. (1,210 Kcal/hr.)
NHP4880SS-316-240240V, 5,600 Btu/hr. (1,411 Kcal/hr.)

Side Mount Kits

Side Mount Kits for Cabinet Coolers

EXAIR's Side Mount Kits make mounting on the side of an electrical enclosure possible when there is limited space on the top or side. (NEMA 4 and 4X Cabinet Cooler Systems must be mounted vertically.) Side Mount Kits maintain the NEMA rating of large and small NEMA Type 12, 4, and 4X enclosures. they mount in a standard electrical knockout (1-1/2 NPS). Side Mount Kits for NEMA 12 Cabinet Cooler Systems have an aluminum construction. Those for NEMA 4 and 4X Cabinet Cooler Systems are Type 303 or Type 316 stainless steel.

What is an EXAIR Cabinet Cooler System?

EXAIR Cabinet Coolers are a low cost, reliable way to cool and purge electronic control panels. They provide air conditioning for the electrical enclosures, eliminating electronic control downtime due to heat, dirt and moisture! These panel cooling systems for enclosures incorporate a vortex tube to produce cold air from compressed air - with no moving parts.

The compact Cabinet Cooler is an easy to use air conditioner that can be installed in minutes through a standard electrical knockout. NEMA 12, 4 and 4X Cabinet Coolers that match the NEMA rating of the enclosure are available in many cooling capacities for large and small control panels.

Why EXAIR Cabinet Coolers?

When the electronics inside a control cabinet overheat, the machine can shut down due to tripped overloads and breakers or heat damage to the circuit boards. Unreliable cooling methods such as fans, heat exchangers, refrigerant air conditioners, and heat pipes are prone to failure as a result of mechanical wear, and clogged filters.

EXAIR Cabinet Coolers provide cold air for large and small control panels and are maintenance free. They have no moving parts to wear out. All Cabinet Coolers are UL and ULC Listed and have a five year “Built To Last” warranty.

Heat Can Stop Your Machines

It happens when you least expect it. High temperatures can cook the electronics that control your machines, resulting in erroneous readings, trip-outs or fried circuit boards. Cooling the electrical cabinet can eliminate these problems, but how will you do it?

Fans

Fans

Opening the panel door and aiming a fan at the circuit boards is a bad idea.

  • It is an OSHA violation that presents a shock hazard to personnel
  • The fan blows hot, humid, dirty air at the electronics
  • The cooling effect is minimal
  • It is likely to fail again since the environment is still hot
Heat Exchangers

Heat Exchangers and Heat Pipes

These have serious limitations. On hot summer days when the temperatures of the room and inside the enclosure are about equal, there’s not enough difference for effective heat exchange.

  • They fail when dust and dirt clog the filter
  • The cooling capacity is limited due to ambient conditions
Refrigerant Panel Air Conditioners

Refrigerant Panel Air Conditioners

These coolers are prone to failure in dirty, industrial environments when dust and dirt clogs the filter.

  • It takes almost a day to install
  • Vibration from machinery causes refrigerant leaks and component failures
  • Compressor life expectancy is typically 2.5 years of continuous operation
  • It requires a floor drain for the condensation
  • Thermostat control can decrease compressor life
  • Average cost for replacing a bad compressor is $750

EXAIR Cabinet Cooler Systems

EXAIR has a complete line of Cabinet Cooler Systems to dependably cool and purge your electrical enclosures. They convert an ordinary supply of compressed air into clean, cold 20ºF (-7°C) air. They mount in minutes through an ordinary electrical knockout and have no moving parts to wear out. Compressed air filtration is provided that keeps water, oil and other contaminants out of the enclosure.

  • There is no room air filter to clog
  • An accurate electrical thermostat control minimizes compressed air use
  • All Cabinet Coolers are UL Listed to US and Canadian safety standards
  • They are the only compressed air powered coolers that are CE compliant

NEMA 4X Cabinet Coolers

NEMA 4X (IP66) Cabinet Cooler systems are made from 303 stainless steel, dust and oil tight, splash resistant, indoor/outdoor capable and corrosion resistant. By incorporating a low pressure valve for all air exhaust, the valve closes and seals when not operating to maintain NEMA 4X enclosure integrity. Thermostat control systems (Models 4804SS-4880SS) are the most efficient system because it will turn itself on and off as needed to cool your enclosure. Includes cooler, solenoid valve and thermostat, filter separator and cold air distribution kit. Models are available in 110VAC, 240VAC and 24VDC. Continuous operation systems (Models 4704SS-4780SS) include the cooler, a filter separator and cold air distribution kit. ETC Thermostat control systems provide on the fly temperature adjustment and an internal temperature feedback display. High Temperature Cabinet Cooler systems should be used when ambient temperatures reach 125°F to 200°F (52°C to 93°C). Non-Hazardous Purge (NHP) models provide a continuous positive purge within the enclosure to prevent contaminants from entering. They are suited for extremely dirty and dusty environments. Dual Cabinet Cooler systems (Models (##50SS-##80SS) provide for additional cooling.

NEMA 4X (IP66) Specifications

Model #CapacityBtu/hr.CapacityKcal/hr.ThermostatControlSoundLevel dBA
4704SS27569No59*
4708SS550139No67*
4715SS1,000252No73
4725SS1,700428No80
4730SS2,000504No80
4740SS2,800706No82
4750SS3,400857No84
4760SS4,0001,007No84
4770SS4,8001,209No84
4780SS5,6001,411No85
4804SS27569Yes59*
4808SS550139Yes67*
4815SS1,000252Yes73
4825SS1,700428Yes80
4830SS2,000504Yes80
4840SS2,800706Yes82
4850SS3,400857Yes84
4860SS4,0001,007Yes84
4870SS4,8001,209Yes84
4880SS5,6001,411Yes85

Dimensions - NEMA 4X Cabinet Cooler

Models 4604SS, 4704SS, 4804SS, 4608SS, 4708SS, 4808SS
EXAIR small NEMA 4X Cabinet Cooler Dimensions
Models 4615SS, 4625SS, 4630SS, 4640SS, 4715SS, 4725SS,
4730SS, 4740SS, 4815SS, 4825SS, 4830SS, 4840SS
NEMA 4X Cabinet Cooler Dimensions

How Cabinet Coolers Work

How the Cabinet Cooler Works

Compressed air enters the vortex tube powered Cabinet Cooler and is converted into two streams, one hot and one cold. Hot air from the vortex tube is muffled and exhausted through the vortex tube exhaust. The cold air is discharged into the control cabinet through the cold air distribution kit. The displaced hot air in the cabinet rises and exhausts to atmosphere through the cabinet air exhaust at a slight positive pressure. Thus, the control cabinet is both cooled and purged with cool, clean air. Outside air is never allowed to enter the control panel.

Other Considerations

Systems for continuous operation include a Cabinet Cooler, distribution kit and filter.
Systems for continuous operation include a Cabinet Cooler, cold air distribution kit and filter.
Systems with thermostat control include a Cabinet Cooler, thermostat, solenoid valve, cold air distribution kit and filter.
Systems with thermostat control include a Cabinet Cooler, thermostat, solenoid valve, cold air distribution kit and filter.

Filtration:

EXAlR Cabinet Cooler Systems include a 5 micron automatic drain water and dirt filter. This filter is critical for protection of electronics from water in the compressed air line. If oil is present in the compressed air supply, the addition of a coalescing (oil removal) filter, such as EXAlR Model 9005, is recommended.

Cold Air Distribution Kit includes tubing, adhesive clips and fittings.
Cold Air Distribution Kit includes tubing, adhesive clips and fittings.

Cold Air Distribution Kit:

The kit includes a length of flexible vinyl tubing used to direct the cold air for circulation, or to hot spots. Tubing connectors and adhesive backed clips to hold the tubing in place are provided.

Humidity:

For a continuous operating Cabinet Cooler, relative humidity inside the enclosure stabilizes at 45%. No moisture condenses inside the enclosure. (The enclosure must be sealed to prevent condensation.)

Inlet Air Temperature:

Cabinet Cooler Systems provide a 50°F (28°C) temperature drop from supply air temperature when the inlet pressure is 80 PSIG (5.5 BAR). Elevated inlet temperature will produce a corresponding rise in cold air temperature and reduction in cooling capacity. Low air pressures will also reduce the cooling capacity.

Mounting:

The Cabinet Cooler mounts to the enclosure through a drilled hole or electrical knockout. The NEMA 12 (IP54) Cabinet Coolers may be mounted on the top or side of the panel. Side Mount Kits are available. (Model 4909 - Small; Model 4910 - Large.) NEMA 4 and 4X (IP66) Cabinet Coolers may be mounted on the top of the panel or on the side of the panel if a Side Mount Kit is used (Model 4906 - Small; Model 4907 - Large).

Solenoid Valve and Thermostat.
Solenoid Valve and Thermostat

Solenoid Valve and Thermostat:

Cabinet Cooler Systems with thermostat control include a solenoid valve and thermostat that limit the flow of compressed air to only when cooling is needed. The solenoid valve is rated 120V, 60Hz or 110V, 50Hz. It is UL Listed and CSA Certified.UL Listed CSA Certified

The thermostat is factory set at 95°F (35°C). It will normally hold ±2°F (1°C) inside the cabinet. It is rated 24VAC-240VAC, 50/60Hz, 24VDC and is UL Recognized and CSA Certified. UL Recognized CSA Certified

Electronic Temperature Control for Cabinet Coolers
ETC units are available in four different models.

Electronic Temperature Control:

EXAIR’s digital ETC™ (Electronic Temperature Control) provides precise temperature control for your electrical enclosure. It can accurately maintain a constant temperature that is slightly under the maximum rating of the electronics, permitting just enough cooling for the electronics without going so cold as to waste compressed air.

The LED readout of the ETC displays the internal temperature of the electrical enclosure (°F or °C) that is constantly being monitored by a quick response thermocouple. The control activates the solenoid valve (included) when the temperature setting is exceeded. The polycarbonate plastic enclosure of the ETC is suitable for NEMA 12, 4 and 4X environments. (Cabinet Cooler not included.)

 Sample RateMax TempSolenoid ValveSetting TempSupply CurrentSensor
Model 9238 120VAC, 50-60 Hz1/sec.158°F (70°C)1/4 NPTPush Button250 mA maxType J Thermocouple
Model 9258 120VAC, 50-60 Hz1/sec.158°F (70°C)1/2 NPTPush Button325 mA maxType J Thermocouple
Model 9239 240VAC, 50-60 Hz1/sec.158°F (70°C)1/4 NPTPush Button165 mA maxType J Thermocouple
Model 9259 240VAC, 50-60 Hz1/sec.158°F (70°C)1/2 NPTPush Button215 mA maxType J Thermocouple

ETC controls are available within Cabinet Cooler Systems or separate for retrofitting on existing coolers. ETCs are RoHS and CE compliant.

Selecting The Right Cabinet Cooler® System

A dangerous shock hazard exists when the panel door is opened to let a fan blow hot, dirty shop air at the electronics.
A dangerous shock hazard exists when the panel door is opened to let a fan blow hot, dirty shop air at the electronics.

With or Without Thermostat Control

EXAIR Cabinet Coolers are available with or without thermostat control. The continuous coolers (Model 4200 and 4700 series) are recommended when constant cooling and a constant positive purge are desirable. The thermostatically controlled systems (Model 4300 and 4800 series) save air by activating the cooler only when internal temperatures approach critical levels. The adjustable thermostat is factory set at 95°F (35°C). Thermostatic systems are recommended where heat load fluctuates and continual purge is not required.

All EXAIR Cabinet Cooler Systems contain a 5 micron Automatic Drain Filter for the compressed air supply and a Cold Air Distribution Kit to circulate the cold air throughout the enclosure.

Environmental Considerations

NEMA 12 (IP54) Cabinet Coolers (dust-tight, oil-tight) are ideal for general industrial environments where no liquids or corrosives are present.

NEMA 4 (IP66) Cabinet Coolers (dust-tight, oil-tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve for both the vortex tube and cabinet air exhaust. This valve closes and seals when the cooler is not operating, to maintain the integrity of a NEMA 4 enclosure.

NEMA 4X (IP66) Cabinet Coolers (corrosion resistant) offer the same protection as NEMA 4, but are constructed of 304 stainless steel for food service, pharmaceutical and corrosive environments.

Cabinet Cooler® Sizing Guide!

Use our Cabinet Cooler Sizing Guide to submit information online about your control panel cooling problem. Download a PDF version, complete it offline and fax it to us at (513) 671-3363.  For immediate help, call our Application Engineering Department at 1-800-903-9247.

Cabinet Cooler Standards and Certifications

OSHA Safe!

EXAIR's Cabinet Cooler Systems comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). In addition, Cabinet Cooler Systems are Listed to applicable UL Standards and requirements by Underwriters' Laboratories. All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Awards - Cabinet Cooler Systems with ETC (Electronic Thermostat Control)

2017 Plant Engineering Product of the Year Award

EXAIR's Cabinet Cooler System with ETC was a finalist in the 2017 Plant Engineering Product of the Year Awards. The Cabinet Cooler System with ETC placed in the Automation & Control category.

Special Cabinet Coolers

EXAIR manufactures special NEMA 12 (IP54), 4 (IP66) and 4X (IP66) Cabinet Coolers suited to specific environmental requirements, as well as Side Mount Kits for mounting Cabinet Coolers on the side of enclosures. EXAIR Dual Cabinet Cooler Systems, High Temperature Cabinet Coolers, Non-Hazardous Purge Cabinet Coolers and Type 316 Cabinet Coolers are now available from stock.

Dual Cabinet Cooler Systems are available in NEMA 12, 4, and 4X models.
Dual Cabinet Cooler Systems are available in NEMA 12, 4, and 4X models.

EXAIR's Dual Cabinet Cooler Systems (shown left) are ideal for large electrical enclosures and high heat loads. Dual Cabinet Coolers are available with cooling capacities of 3,400 (857 Kcal/hr.), 4,000 (1,007 Kcal/hr.), 4,800 (1,209 Kcal/hr.) and 5,600 Btu/hr. (1,411 Kcal/hr.).For more information, contact an Application Engineer.

High Temperature Cabinet Coolers for ambients up to 200°F (93°C) are available.
High Temperature Cabinet Coolers for ambients up to 200°F (93°C) are available.

High Temperature Cabinet Cooler Systems for ambients of 125° to 200°F (52° to 93°C) are available (shown right). Internal components can withstand high temperatures (like those near furnaces, ovens, etc.) High Temperature Dual Cabinet Cooler Systems are also available.

The continuous purge of the NHP Cabinet Cooler System keeps dirt, heat and moisture out of the enclosure.
The continuous purge of the NHP Cabinet Cooler System keeps dirt, heat and moisture out of the enclosure.

Non-Hazardous Purge Cabinet Cooler Systems (shown left) are ideal for dirty areas where contaminants might normally pass through small holes or conduits. Under normal conditions, the NHP Cabinet Cooler System provides a slight positive pressure in the enclosure by passing 1 SCFM (28 SLPM) of air through the cooler, when the solenoid valve is in the closed position. When the thermostat detects high temperature, it energizes the solenoid valve to pass full line pressure to the Cabinet Cooler, giving it full cooling capability. The continuous purge of the NHP Cabinet Cooler System keeps dirt, heat and moisture out of the enclosure.

316SS Cabinet Coolers use Type 316 stainless steel which is more resistant to corrosive conditions than other stainless steels.
316SS Cabinet Coolers use Type 316 stainless steel which is more resistant to corrosive conditions than other stainless steels.

Type 316 Stainless Steel NEMA 4X Cabinet Cooler Systems (shown right) are suitable for food service, pharmaceutical, harsh and corrosive environments, and other applications where 316SS is preferred. Capacities from 650 to 5,600 Btu/hr. (164 to 1,411 Kcal/hr.) are available.

EXAIR Dual Cabinet Coolers, High Temperature Cabinet Coolers, Non-Hazardous Purge Cabinet Coolers and Type 316 Cabinet Coolers are available from stock.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
More Information
Material Type 316 Stainless Steel
Back To Top