Model 6240 3/4" Alum. Adjustable Air Amplifier Kit

Adjustable Air Amplifier Kits include everything you need to simplify installation. They include an Adjustable Air Amplifier, shim set, filter
Model
6240
$389.00

View More
Adjustable Air Amplifier Kits include everything you need to simplify installation. They include an Adjustable Air Amplifier, shim set, filter separator and pressure regulator (with coupler).Adjustable Air Amplifiers pull in large volumes of surrounding air to produce high volume, high velocity outlet flows. Utilizing the Coanda effect, a basic principle of fluidics, Air Amplifiers become a simple, low cost way to circulate air, move smoke, fumes, and light materials. Force and flow for the Adjustable Air Amplifier is changed by turning the exhaust end (with the knurled ring loose) to open or close the continuous air gap. When desired performance is obtained, the knurled ring can be tightened to lock the flow at that setting. Available in aluminum or in stainless steel for food service, higher temperatures (400°F/204°C), and corrosive applications.

Applications

  • Vent welding smoke
  • Cool hot parts
  • Dry wet parts
  • Clean machined parts
  • Distribute heat in ovens/molds
  • Ventilate confined areas
  • Dust collection
  • Exhaust tank fumes

Advantages

Compared to Fans:

  • Compact, lightweight, portable
  • No electricity
  • No moving parts - no maintenance
  • Ends are easily ducted
  • Instant on/off
  • Variable force and flow
  • No RF interference

Compared to Venturies and Ejectors:

  • More air with lower compressed air consumption
  • Higher flow amplification
  • No internal obstructions
  • Meets OSHA pressure and noise requirements
  • Quiet

Adjustable Air Amplifier Systems

Adjustable Air Amplifiers are available in three different model types:

  • Adjustable Air Amplifier Only
  • Adjustable Air Amplifier Kits - include an Adjustable Air Amplifier, filter separator and pressure regulator (with coupler).
  • Deluxe Adjustable Air Amplifier Kits - include an Adjustable Air Amplifier, EFC, filter separator and pressure regulator (with coupler).
ModelOutlet Diameter
3/4" (19mm)1-1/4" (32mm)2" (51mm)3" (76mm)4" (102mm)
Aluminum Adjustable Air Amplifier Only60406041604260436044
Aluminum Adjustable Air Amplifier Kit62406241624262436244
Deluxe Aluminum Adjustable Air Amplifier Kit6240DX6241DX6242DX6243DX6244DX
Stainless Steel Adjustable Air Amplifier Only60306031603260336034
Stainless Steel Adjustable Air Amplifier Kit62306231623262336234
Deluxe Stainless Steel Adjustable Air Amplifier Kit6230DX6231DX6232DX6233DX6234DX

Adjustable Air Amplifier Performance

80 PSIG (5.5 BAR) Air Consumption Amplification Air Volume at Outlet Air Volume at 6" (152mm) Sound Level
Model # SCFM SLPM RATIO SCFM SLPM SCFM SLPM dBA
6030, 6230, 6040, 6240 8.9 252 10 89 2,520 267 7,560 78
6031, 6231, 6041, 6241 12.9 365 16 206 5,833 618 17,500 81
6032, 6232, 6042, 6242 21.5 608 20 430 12,176 1,290 36,529 82
6033, 6233, 6043, 6243 35.2 997 22 774 21,917 2,323 65,780 83
6034, 6234, 6044, 6244 50 1,416 24 1,200 33,980 3,600 101,941 84

Tested with .002" (0.05mm) gap.

Adjustable Air Amplifier Dimensions

EXAIR Adjustable Air Amplifier Dimensions

Models

Model Numbers

Stainless Steel Adjustable Air Amplifier 6030 6031 6032 6033 6034
Aluminum Adjustable Air Amplifier 6040 6041 6042 6043 6044
A in 1.50 2 3.13 4 5
mm 38 51 79 102 127
B in 0.75 1.25 2 3 4
mm 19 32 51 76 102
C in 2.22 2.88 3.25 4.06 5
mm 57 73 83 103 127
D in 0.45 0.84 1.64 2.20 3.02
mm 11 21 42 56 77
E in 0.72 1 1.06 1.22 1.50
mm 18 25 27 31 38
F in 0.56 0.75 0.75 1.25 1.75
mm 14 19 19 32 44
G in 1.06 1.38 1.50 1.83 2.13
mm 27 35 38 46 54
H in 1.25 1.75 2.75 3.50 4.50
mm 32 44 70 89 114
J NPT 1/8 1/4 3/8 1/2 1/2

Adjustable Air Amplifier Airflow Pattern

EXAIR Adjustable Air Amplifier Airflow Pattern

Models

Model Numbers

Stainless Steel Adjustable Air Amplifier 6030 6031 6032 6033 6034
Aluminum Adjustable Air Amplifier 6040 6041 6042 6043 6044
A in 1.50 2 2.5 3.5 5
mm 38 51 64 89 127
B in 2.4 2.9 3.4 4.6 5.8
mm 61 74 86 117 147
C in 4.2 4.7 5.2 6.5 7.4
mm 107 119 132 165 188
D in 6 6.5 7 8 9
mm 152 165 178 203 229

How Air Amplifiers Work

How the Air Amplifier Works

Compressed air flows through the air inlet (1) into an annular chamber (2). It is then throttled through a small ring nozzle (3) at high velocity. This primary airstream adheres to the Coanda profile (4), which directs it toward the outlet. A low pressure area is created at the center (5), inducing a high volume flow of surrounding air into the primary airstream. The combined flow of primary and surrounding air exhausts from the Air Amplifier in a high volume, high velocity flow.

Air Amplifier Standards and Certifications

CE Compliant OSHA Safe!

EXAIR Air Amplifiers comply with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Caution WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Efficiency Lab

Does your company currently use a blowoff product similar to EXAIR’s that you’d like us to evaluate? Ship it to the EXAIR Efficiency Lab! Our qualified staff will test it for FREE, using EXAIR’s calibrated testing equipment. We’ll compare the performance of your existing product (air consumption, effectiveness, noise levels, efficiencies, etc) with the EXAIR Intelligent Compressed Air® products. The results will be published in a comprehensive report that includes a cost savings analysis. For most applications, EXAIR products can help you improve your efficiency AND typically pay for themselves in a matter of weeks.

To participate in our Efficiency Lab testing, please complete this Product Efficiency Survey to give us the details about your current application and blowoff set up. You can also feel free to contact an Application Engineer for more information at (800) 903-9247 or (513) 671-3322.

After completing the form, your product can be shipped to: Efficiency Lab, EXAIR, 11510 Goldcoast Dr., Cincinnati, OH 45249-1621

This offer is available to all customers in the U.S. and Canada only. Some restrictions might apply.

Products must be shipped to EXAIR freight prepaid. EXAIR will pay the return shipping via UPS ground.

If you cannot send in your product, fill out this Product Efficiency Survey to give us the details about your current application and we will estimate the savings for you.

If you have questions about a product or you need help in determining the best model for your application, fill out our Application Assistance Worksheet! When you submit this information, one of our knowledgeable Application Engineers will respond with a recommendation for the EXAIR product best suited for the application.

If you would rather fax the form, you can download the Application Assistance Worksheet PDF, print the completed .pdf file, and fax it to us at (513) 671-3363.

For immediate help, call our Application Engineering Department at 1 800-903-9247.

Special Air Amplifiers

Special High Temperature Air Amplifier Model 121021

EXAIR will manufacture special Air Amplifiers suited to your specific application requirements. The Model 121021 High Temperature Air Amplifier was developed for moving hot air to surfaces requiring uniform heating while in a furnace or oven. Modeled after our Super Air Amplifier, the High Temperature Air Amplifier is the most efficient for pushing high volumes of hot air to points that typically remain cool. This special design is rated for environments up to 700°F (374°C) and its surface is protected from heat stress by a mil-spec. coating process (developed for the aircraft industry), allowing easy disassembly for changing shims or cleaning.

Special Flanged Air Amplifier

Another stainless steel version for flange mounting was developed as a fan back-up for exhausting flue gases from a furnace. In the event of a power failure, this special Air Amplifier can quickly evacuate the fumes that could be harmful to workers close by.

Special Adjustable Air Amplifier with PTFE plug

A PTFE plug was used with a stainless steel Adjustable Air Amplifier to help pull a sticky material through a process and prevent the material from depositing on the Air Amplifier. EXAIR's Intelligent Compressed Air® products can be manufactured to your special requirements.

If you have special requirements, please contact an Application Engineer to discuss it.

How to Determine Total Output Flow for an Adjustable Air Amplifier

Total Output Flow - Adjustable Air Amplifier

Total Airflow: From the performance curves (above), determine total output flow for any Adjustable Air Amplifier at any pressure.

Example: A Model 6031 at 60 PSIG (4.1 BAR) supply air pressure has a total output flow of 165 SCFM (4,672 SLPM).

Air Consumption: Divide total output flow by the amplification ratio to determine air consumption for any Adjustable Air Amplifier at any air pressure.

In the example above, the Model 6031 at 60 PSIG (4.1 BAR) supply air pressure has a total output flow of 165 SCFM (4,672 SLPM). Dividing this total output flow by its amplification ratio of 16 gives an air consumption of 10.3 SCFM (292 SLPM).

Air Amplifier Model Selection Guide

  Efficiency Sound Level Mounting Flange Flow Adjustment Temperature Rating Corrosive Applications
Super Air Amplifier High Low Yes With Shims 275°F (135°C) No
Aluminum Adjustable Air Amplifier Medium Variable No Infinite (no Shims) 275°F (135°C) No
Stainless Steel Adjustable Air Amplifier Medium Variable No Infinite (no Shims) 400°F (204°C) Yes
High Temperature Air Amplifier High Low No With Shims 700°F (374°C) Yes
Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
More Information
Material Aluminum
Back To Top