Model 8462 2" Gen4 Super Ion Air Wipe Kit

EXAIR's 2" Gen4 Super Ion Air Wipe Kit includes a shim set, Model 7960 Gen4 Power Supply, filter separator and pressure regulator (
Model
8462
$2,033.00

View More
EXAIR's 2" Gen4 Super Ion Air Wipe Kit includes a shim set, Model 7960 Gen4 Power Supply, filter separator and pressure regulator (with coupler). The Gen4 Super Ion Air Wipe provides a uniform 360° ionized airstream that is easy to clamp around a part for eliminating static electricity and contaminants. It is ideal for use on pipe, cable, extruded shapes, hose, wire and more. The high volume, high velocity flow attaches itself to the surface and wipes it down with static eliminating ions. The airflow stays attached to the surface and is effective far away from where the Gen4 Super Ion Air Wipe is mounted. An optional pressure regulator provides infinite control of the air volume and velocity.

Applications

  • Clean and neutralize extrusions
  • Neutralizing pipe, tubing, wire
  • Cleaning molded parts
  • Neutralizing static for quality printing
  • Pre-paint dust removal
  • Remove chips, shavings and sawdust
  • Container neutralization

Advantages

  • Low air consumption
  • Rapid static decay
  • Quiet
  • Non-contact
  • Effective up to 15 feet (4.6m)
  • Shockless, non-radioactive
  • Compact, rugged, easy to install
  • No moving parts - low maintenance
  • Variable force and flow

Super Ion Air Wipe Models

Super Ion Air Wipes are available in three different model types:

  • Super Ion Air Wipe - includes the Super Ion Air Wipe and 5' (1.52m) armor shielded cable.
  • Super Ion Air Wipe Systems - include a Super Ion Air Wipe and Model 7960 Power Supply (115 VAC/230 VAC, 50/60Hz).
  • Super Ion Air Wipe Kits - include a Super Ion Air Wipe, Model 7960 Power Supply, shim set, filter separator and pressure regulator (with coupler).
Diameter

Super Ion Air Wipe

Super Ion Air Wipe Systems

Super Ion Air Wipe Kit

2" (51mm)816282628462
4" (102mm)816482648464

Accessories

Static Eliminator Power Supply

Power Supply - The Model 7960 selectable voltage Power Supply allows you to choose the input voltages of 115 VAC or 230 VAC. The modular cable with electromagnetic shielding protects sensitive electronics against electromagnetic interference while easing connections and routing. An integrated fuse on the primary protects against voltage spikes. Power Supplies are UL Component Recognized to U.S. and Canadian Standards, and are CE and RoHS compliant.

Super Ion Air Wipe Shim Set

Shim Sets - The compressed air exhausts through a gap which is set with a shim positioned between the cap and the body of the Super Air Wipe. The Super Ion Air Wipe is shipped with a .002" (0.05mm) thick stainless steel shim installed which works best for most applications. Force and flow may be easily increased by adding shims to open the gap. Increasing the gap opening offers higher velocity and harder hitting force. Air consumption and noise will be slightly higher. Super Ion Air Wipe shim sets include two .002" (0.05mm) stainless steel shims that can be stacked. Shim sets are included with all kits or can be purchased separately.

Super Ion Air Wipe Performance

Model

Number

Air Consumption*Sound Level

Dissipates

5kV**

SCFMSLPMdBASeconds
816229.5835770.20
816450.21,422810.20

* tested at 80 PSIG (5.5 BAR)

** 12" (305mm) from target

Super Ion Air Wipe Specifications

Cablea 5' length of armored, electromagnetically shielded cable is included
Power SupplyEXAIR Model 7960 or 7961 Power Supply (5kV) is required for Super Ion Air Wipe operation. Power supplies are equipped with a modular 6' (1.83m) power cord, lighted power switch, integrated fuse on the primary and (2) or (4) high voltage outlets.
Compressed Air1/4 NPT intlet
ElectricalFor use with 5 kVrms, 5 milliamperes (max) power supply
Electrical Hazard

Shockless (less than 40 microamperes short circuited).

Do not use near flammable materials or gases.

Materials of Construction
Metal partsAluminum
Plastic partsUL rated 94 HB
EmittersStainless Steel
Maximum ambient temperature165°F (74°C)

Super Ion Air Wipe Dimensions

EXAIR Super Ion Air Wipe Dimensions

Model

A

B

C

8162 2" (51mm) 4.75" (121mm) 2.7" (69mm)
8164 4" (102mm) 6.75" (171mm) 4.72" (120mm)
 

How the Super Ion Air Wipe Works

How EXAIR's Super Ion Air Wipe Works

The Super Ion Air Wipe incorporates a Super Air Wipe and a split ionizing collar, energized by a power supply. Compressed air is ejected through the small ring nozzle of the Super Air Wipe at high velocity (1). A conical 360° ring of air is created that induces high volumes of surrounding air (2). The airflow passes through the collar and is ionized by two emitter points (3). That high velocity, ionized airstream attaches itself to the surface of the material running through the Super Ion Air Wipe (4), uniformly eliminating the static electricity and removing any contaminants from the surface.

Static Eliminator Standards and Certifications

OSHA Safe!

EXAIR's Gen4 Super Ion Air Knife complies with OSHA's Safety Requirements, the EU General Product Safety Directive (2001/95/EC) and meet the noise limitation requirements of the EU Machinery Directive (2006/42/EC). All sound level measurements are taken at 3 feet away.

RoHS Compliant

The Intellistat Ion Air Gun and Intellistat Ion Air Nozzle are UL Listed, and are CE and RoHS compliant.

Gen4 Ionizing Bars and Gen4 Power Supplies are UL Component Recognized to U.S. and Canadian safety standards, and are CE, EMC and RoHS compliant.

Conflict Mineral Free

Look for this symbol to designate conflict mineral free products throughout our website. EXAIR supports Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act and we are committed to compliance with the conflict minerals rule in order to curb the illicit trade of tin, tantalum, tungsten and gold in the DRC region. EXAIR is using the CMRT 3.02 template to document our supply chain and commitment to conflict free products.

Caution WARNING! Cancer and Reproductive Harm - www.P65Warnings.ca.gov/product

Selecting the Right EXAIR Static Eliminator

Static Eliminators with Air

Combining our engineered airflow products with ionizers gives us the ability to eliminate the charge quickly and at great distances. Laminar flow airstreams make it possible to blow away any contaminants and the charge that attracts them. They are ideal for:

  • Hard to reach places or obstructed surfaces
  • Product moving at high speeds
  • Surfaces with an extremely high charge

Compressed air consumption and noise are minimized while providing force that can be adjusted from a “blast” to a “breeze”. Tests show these ionizers positioned two feet (610mm) away from a charged surface to be as effective as a Gen4 Ionizing Bar without air delivery positioned one-half inch (13mm) from the surface.

Gen4 Super Ion Air Knife

The Gen4 Super Ion Air Knife provides the best performance of all ionizers. It uses our Super Air Knife (40:1 air amplification) to deliver a uniform sheet of ionized air effective up to 20 feet (6.1m) away.

Gen4 Standard Ion Air Knife

The Gen4 Standard Ion Air Knife uses our Standard Air Knife (30:1 air amplification) to deliver a sheet of ionized air to the surface. Air consumption and noise are somewhat higher than the Gen4 Super Ion Air Knife.

Gen4 Super Ion Air Wipe

The Gen4 Super Ion Air Wipe clamps around the part and creates a ring of ionized airflow. It neutralizes and cleans continuous moving surfaces.

Gen4 Ion Air Cannon

The Gen4 Ion Air Cannon uses our Super Air Amplifier (22:1 air amplification) to provide a focused, conical airstream that is capable of removing the charge up to 15 feet (4.6m) away.

Intellistat Ion Air Gun

The new patented Intellistat Ion Air Gun produces ionized compressed air to neutralize static and remove troublesome particulates during clean processes, test procedures and sensitive assembly work, particularly in laboratories, clean rooms or scientific testing facilities. With a +/-30 volt balance the Intellistat was designed to use minimal compressed air while delivering precise blow-off and exceptional static decay rates capable of reducing 5000 volts to less than 500 in under one second.

Intellistat Ion Air Nozzle

The new patented Intellistat Ion Air Nozzle produces ionized compressed air to neutralize static and remove troublesome particulates during clean processes, test procedures and sensitive assembly work, particularly in laboratories, clean rooms or scientific testing facilities. With a +/-30 volt balance the hands-free Intellistat was designed to use minimal compressed air while delivering precise blow-off and exceptional static decay rates capable of reducing 1000 volts to less than 100 in under one second.

Gen4 Ion Air Gun

The Gen4 Ion Air Gun uses our High Velocity Air Jet (5:1 air amplification) to provide a narrow beam of ionized airflow. This hand-held static eliminator is rugged for industrial use and has incredibly fast static decay rates.

Gen4 Ion Air Jet

The Gen4 Ion Air Jet uses our High Velocity Air Jet (5:1 air amplification), and is an effective spot cleaner. Available for permanent mount or with flexible Stay Set Hose, this ionizer is the ideal way to focus an ionized airflow at confined areas.

Static Eliminators without Air

In some situations, even the smallest amount of airflow can disturb the product. This is especially true for lightweight materials. EXAIR manufactures two styles of ionizers for these critical applications.

Gen4 Ionizing Bar

Gen4 Ionizing Bars are ideal for relatively flat materials, where the bar can be mounted close to the product surface. The Gen4 Ionizing Bar is compact, allowing it to fit in the confined spaces of machinery, where the charge is generated.

Gen4 Ionizing Point

The Gen4 Ionizing Point is effective for spot neutralization. The compact size makes it ideal for winding or slitting operations. It can also be mounted through a duct to neutralize static charges due to moving air or materials.

Special Static Eliminators

Special Static Eliminators

EXAIR manufactures static eliminators suited to specific application requirements. This special ionizer was developed for the automotive industry. This air amplifier and ionizer combination is used to dry water based paints on car bodies while eliminating the possibility of a static charge that might attract dust or other contaminants.

Loading ...
To download available CADs and use the 3D viewer, please login and select a model.
Loading ...
Back To Top