Skip to the beginning of the images gallery

Model 9003 1/4 NPT Manual Drain Filter Separator

EXAIR's Manual Drain Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from

Model

9003

$40.00

CADs

NEMA 4 Cabinet Coolers

Description

EXAIR's Manual Drain Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging the compressed air products. Model 9003 will capture contaminants in a polycarbonate bowl which must be emptied manually. A Filter Separator should be installed prior to an oil removal filter, pressure regulator or valve.

NEMA 4 Cabinet Coolers

NEMA 4 (IP66) Cabinet Cooler systems are made from 303 stainless steel, dust and oil tight, splash resistant, indoor/outdoor capable and corrosion resistant. By incorporating a low pressure valve for all air exhaust, the valve closes and seals when not operating to maintain NEMA 4X enclosure integrity.

Thermostat control systems (Models 4804-4880) are the most efficient system because it will turn itself on and off as needed to cool your enclosure. Includes cooler, solenoid valve and thermostat, filter separator and cold air distribution kit. Models are available in 110VAC, 240VAC and 24VDC.

Continuous operation systems (Models 4704-4780) include the cooler, a filter separator and cold air distribution kit.

ETC Thermostat control systems provide on the fly temperature adjustment and an internal temperature feedback display.

High Temperature Cabinet Cooler systems should be used when ambient temperatures reach 125°F to 200°F (52°C to 93°C).

Non-Hazardous Purge (NHP) models provide a continuous positive purge within the enclosure to prevent contaminants from entering. They are suited for extremely dirty and dusty environments.

Dual Cabinet Cooler systems (Models (##50-##80) provide for additional cooling.

Model	Thread Size	Flow	Filter Element	Bowl Construction	Drain	Max Pressure	Max Temp.
9003	1/4 FNPT	27 SCFM (765 SLPM)	20 micron	Polycarbonate	Manual	150 PSIG	125°F (52°C)
9004	1/4 FNPT	43 SCFM (1,218 SLPM)	5 micron	Metal Guard, Polycarbonate	Automatic	150 PSIG	125°F (52°C)
9001	3/8 FNPT	65 SCFM (1,841 SLPM)	5 micron	Metal	Automatic	175 PSIG	120°F (49°C)
9032	1/2 FNPT	90 SCFM (2,549 SLPM)	5 micron	Metal	Automatic	175 PSIG	120°F (49°C)
9002	3/4 FNPT	220 SCFM (6,230 SLPM)	5 micron	Metal	Automatic	175 PSIG	120°F (49°C)
9066	1-1/4 FNPT	400 SCFM (11,327 SLPM)	5 micron	Metal	Automatic	175 PSIG	120°F (49°C)