Filters and Regulators
To optimize your compressed air system, EXAIR offers:
- Filter Separators to remove water, dirt and rust from your compressed air system. Available with either manual or automatic drains
- Oil Removal Filters to remove the lubricants and solid particulates that can make their way into your compressed air stream
- Pressure Regulators to fine tune compressed air supply at point-of-use
- Mounting brackets and couplers to make installation easy!
-
Manual Drain Filter SeparatorsEXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging the compressed air products. Model 9003 will capture contaminants in a polycarbonate bowl which must be emptied manually. Learn More -
Automatic Drain Filter SeparatorEXAIR's Filter Separators remove water, dirt and rust from your compressed air system. They prevent these contaminants from plugging or damaging compressed air products. Models 9001, 9002, 9004, 9032 and 9066 feature an automatic drain which empties accumulated liquid and debris from the bowl with a float mechanism.
Learn More -
Oil Removal FiltersEXAIR's Model 9027, 9005, 9006 and 9010 Oil Removal Filters remove oil and solid particulate that is typical of many compressed air systems. A 0.03 micron element is used to trap submicron particles. Learn More -
Pressure RegulatorsEXAIR's Pressure Regulators permit easy selection of an operating pressure that will allow the air product to work properly without using excessive amounts of compressed air. Learn More -
Model 9011 1/4 NPT Pressure GaugeEXAIR's Pressure Regulators permit easy selection of an operating pressure that will allow the air product to work properly without using excessive amounts of compressed air.
Learn More$35.00 -
Model 9017 Thermostat OnlyThe adjustable thermostat used with Cabinet Cooler Systems is factory set at 95°F (35°C). It will normally hold ±2°F (1°C) of the desired temperature setting. It is rated 24V-240V AC or DC, 50/60 Hz and is UL Recognized, CSA Certified.
Learn More$206.00 -
Model 900398 Pressure Regulator Mounting BracketMounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number. Learn More$27.00 -
Model 900396 Filter Mounting Bracket for Models 9001, 9004, 9005, 9027 and 9032Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number. Learn More$21.00 -
Model 900397 Filter Mounting Bracket for Model 9002Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number. Learn More$26.00 -
Model 900395 Filter Mounting Bracket for Model 9003Mounting brackets are used to mount filters and pressure regulators to a frame, wall or sturdy surface. Coupling brackets are used to couple the filter and regulator together to create a rigid, sealed assembly. Kits combine both the mounting bracket and coupling brackets in one model number. Learn More$21.00