Camera Cooling - kiln
Having installed their vision system at their customer's kiln, the high temperatures and harsh work enviroment was taking its toll on their cameras. They needed a way to keep the camera cool and the lens clean.
Installing a Model 3225 Vortex Tube into the camera enclosure for cooling and Model 110006 6" (152mm) Super Air Knife in front of the lens to protect it from contaminants not only solved their problem but allowed them to mount the camera closer to the work area for more accurate readings.
-
Model 5904 Single Point Hose Kit for Mini CoolerFlexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$30.00 -
Model 3905 Cold Muffler for 2-8 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$47.00 -
Model 3808 Mini Cooler System, One Cold OutletEXAIR's Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Learn More$443.00 -
Model 3725 Adjustable Spot Cooler onlyEXAIR's compressed air powered Adjustable Spot Cooler offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$447.00 -
Model 3499 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3499 is 150 SCFM.
Learn More$1,342.00 -
Model 3498 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3498 is 100 SCFM.
Learn More$1,342.00 -
Model 3475 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3475 is 75 SCFM.
Learn More$1,342.00 -
Model 3450 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3450 is 50 SCFM.
Learn More$1,342.00 -
Model 3440 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3440 is 40 SCFM.
Learn More$292.00 -
Model 3408 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3408 is 8 SCFM.
Learn More$240.00 -
Model 3275 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3275 is 75 SCFM.
Learn More$1,342.00 -
Model 3250 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3250 is 50 SCFM.
Learn More$1,342.00 -
Model 3240 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3240 is 40 SCFM.
Learn More$292.00