Cold Gun Eliminates Stains Caused by Water
Company manufactures aluminum tubing used for condenser units. Customer extrudes aluminum tubing and places it through a roll coating process where it is coated with flux. It then goes through a curing and drying oven. They normally place the tube through a water cooling bath but the water has been causing marks and stains not being accepted by the automotive customer. They have ordered (4) EXAIR Model 5330 High Power Cold Guns with Dual Point Hose Kits to provide a non-staining, cooling option for these aluminum tubes.
-
Model 5330 High Power Cold Gun System (Two Cold Outlets)The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator. Learn More$595.00 -
Model 5315 Standard Cold Gun System (Two Cold Outlets)The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator. Learn More$510.00 -
Model 5230 High Power Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$580.00 -
Model 5215 Standard Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$496.00 -
Model 5901 Single Point Hose Kit for Cold GunFlexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 11" long. Learn More$38.00 -
Model 5902 Dual Point Hose Kit for Cold GunFlexible Dual Point Hose Kit, recommended when heat is generated over a larger surface area. Dual Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 11" long. Learn More$53.00