Cold Gun Protects Nickel Plated Parts from Heat Fracturing
This customer machines special nickel plated miniature parts. The nickel plating is very susceptible to cracks and fractures from the heat generated during the machining process. They're medical components, so liquid cooling is not an option. They installed a Model 5215 Cold Gun Aircoolant System to direct a stream of refrigerated air at the cutting point, keeping the temperature down and preventing the defects in the nickel plating.
The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator.
The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator.
The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator.