Cold Gun Reduces Cooling Time for Shrink Fit Gears
Customer makes small precision gears and spindles. The gears are heated to expand before they are pressed on to the spindle shaft. When cooled, the gear contracts and creates a press fit. To reduce cooling time and improve production, they installed a Model 5215 Cold Gun Aircoolant System to blow refrigerated air onto the parts. Cooling time went from minutes to seconds, and production efficiency was greatly increased.
-
Model 5215 Standard Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$496.00 -
Model 5230 High Power Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$580.00 -
Model 5315 Standard Cold Gun System (Two Cold Outlets)The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator. Learn More$510.00