Cool Parts Faster and Increase Production
Company manufactures plastic weld machinery with induction heating to weld tips onto plastic catheters. The induction heating process must be cooled quickly to increase cycle time of the machine. Their customer base continues to demand more throughput of the weld machinery. They have chosen an EXAIR Model 3708 Mini Cooler System to provide a cold air blow off which cools the induction weld of the catheter. This allows them to increase production by increasing the production speed of the machinery.
-
Model 5904 Single Point Hose Kit for Mini CoolerFlexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$30.00 -
Model 3905 Cold Muffler for 2-8 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$47.00 -
Model 3808 Mini Cooler System, One Cold OutletEXAIR's Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Learn More$443.00 -
Model 3725 Adjustable Spot Cooler onlyEXAIR's compressed air powered Adjustable Spot Cooler offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$447.00 -
Model 3499 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3499 is 150 SCFM.
Learn More$1,342.00 -
Model 3498 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3498 is 100 SCFM.
Learn More$1,342.00 -
Model 3475 Vortex TubeEXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Model 3475 is 75 SCFM.
Learn More$1,342.00