Cooling A Taper On A Machining Operation

A manufacturer of gas valves was having trouble machining a critical taper on a brass casting. The trouble was caused by heat buildup in the material and on the tool. By installing a Model 5215 Cold Gun they have eliminated the problem, reduced scrap, and extended tool life.

  1. Model 5215 Standard Cold Gun System (One Cold Outlet)
    Applications
    Model 5215 Standard Cold Gun System (One Cold Outlet)
    The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator.
    $521.00
  2. Model 5315 Standard Cold Gun System (Two Cold Outlets)
    Applications
    Model 5315 Standard Cold Gun System (Two Cold Outlets)
    The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator.
    $537.00
  3. Model 5230 High Power Cold Gun System (One Cold Outlet)
    Applications
    Model 5230 High Power Cold Gun System (One Cold Outlet)
    The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator.
    $613.00
NOT SURE WHERE TO BEGIN?

Consult with an

EXAIR Engineer

Schedule a video call with an Application Engineer to get help on product selection, installation, and optimization.

Book Your Consult

Back To Top
Loading...