Cooling Calibrated Heat Sensor
Customer designs and manufactures heating elements for glass top cook stoves. They insert a heat sensor rod into a RF field to heat it up to calibrate it. After they take the sensor out of RF field they need to cool it down before packaging.
The cooling cycle was so long that they had to stage them on a table before boxing them up. Using the Model 3215 Vortex Tube they were able to cool the sensor and pack it before the next sensor had completed its test. This provided them with a continuos process and eliminated the staging table.
-
Model 3925 Adjustable Spot Cooler System (two cold outlets)EXAIR's Adjustable Spot Cooler System (two cold outlets) includes everything needed for a single point cooling station that offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$662.00
-
Model 3930 Cooling Kit (Up to 2,800 Btu/hr.)
If you are unsure of your flow and temperature requirements, EXAIR recommends the purchase of an EXAIR Cooling Kit. It contains a vortex tube, cold air muffler, air line filter and all generators required to experiment with the full range of airflows and temperatures. Model 3930 for up to 2800 Btu/hr. (706 Kcal/hr.).
- Temperatures adjustable from -50 to +260 Fahrenheit Learn More
$518.00 -
Model 3909 Generator Kit for 2-8 SCFM (Small) Vortex Tubes
Generator Kit for 2-8 SCFM (Small) Vortex Tubes (Includes 6 Generators and 3 Taper Sleeves. Permits setting for all small Vortex Tube capacities and styles.)
Learn More$64.00 -
Model 5905 Dual Point Hose Kit for Mini CoolerFlexible Dual Point Hose Kit, recommended when heat is generated over a larger surface area. Dual Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$40.00
-
Model 3902 Generator Kit for 10-40 SCFM (Medium) Vortex Tubes
Generator Kit for 10-40 SCFM (Medium) Vortex Tubes (Includes all 10 Generators. Permits setting for all medium Vortex Tube capacities and styles.)
Learn More$138.00 -
Model 3825 Adjustable Spot Cooler System (one cold outlet)EXAIR's Adjustable Spot Cooler System (one cold outlet) includes everything needed for a single point cooling station that offers a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. With the turn of a knob, you can select a precise temperature setting from -30°F (-34°C) to room temperature. Learn More$648.00
-
Model 3910 Generator Kit for 50-150 SCFM (Large) Vortex Tubes
Generator Kit for 50-150 SCFM (Large) Vortex Tubes. (Includes all 8 Generators. Permits setting for all large Vortex Tube capacities and styles.)
Learn More$489.00 -
Model 3998 Cooling Kit (Up to 10,200 Btu/hr.)
This kit includes the large Vortex Tube and all interchangeable generator sets for cooling rates up to 10,200 Btu/hr (2,570 kcal/hr.) The filter, cold air muffler, hose and clips are also included. Vortex Tubes convert an ordinary supply of compressed air into two streams; one hot and one cold. Applications include cooling hot melts, cutting tools, welding horns, electronic controls, soldered parts and gas samples. Temperatures adjustable from -50°F to +250°F.
Learn More$1,987.00 -
Model 3908 Cooling Kit (Up to 550 Btu/hr.)If you are unsure of your flow and temperature requirements, EXAIR recommends the purchase of an EXAIR Cooling Kit. It contains a vortex tube, cold air muffler, air line filter and all generators required to experiment with the full range of airflows and temperatures. Model 3908 for up to 550 Btu/hr. (139 Kcal/hr.). Temperatures adjustable from -50 to +260 Fahrenheit. Learn More$435.00
-
Model 3901 Cold Muffler for 10-40 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$49.00
-
Model 3906 Cold Muffler 50-150 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$126.00
-
Model 3903 Hot Muffler for 2-40 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$43.00