Cooling Pharmaceutical Panels
The customer has a control cabinet that becomes overheated in the summer time and shuts down their pharmaceutical processing line. They experience electronic board failure which results in further costs due to cost of repair and down-time. They are located in Puerto Rico, so the ambient heat is a larger concern in their location. Also, due to their relative remote location, they cannot just go down the street to get a replacement board for their controller box. By removing their heat problem in the control panel with a Model 4825SS Cabinet Cooler, have saved themselves the cost of maintenance and down-time associated with the heat related break downs.
-
Model NHP4630SS NEMA 4X 2,000 Btu/hr NHP Cabinet CoolerA dirt, oil, splash and corrosion resistant NEMA 4X Non Hazardous Purge Cabinet Cooler® System runs efficiently by turning air on and off and also provides a slight positive pressure in the enclosure to keep contaminants from entering small holes or conduits. They are available with a thermostat control. Learn More$935.00 -
Model 4740SS-316 NEMA 4X 2,800 Btu/hr 316 St. St. Cabinet Cooler, Cont OperNEMA 4X (IP66) Cabinet Coolers (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4X enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X continuous Cabinet Cooler® Systems are recommended when constant cooling and constant positive purge are desirable. Systems for continuous operation include a Cabinet Cooler, cold air distribution kit and filter. All Cabinet Coolers are UL Listed and CE compliant. They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$1,743.00 -
Model HT4615SS NEMA 4X 1,000 Btu/hr HT Cabinet CoolerHigh Temperature Cabinet Coolers for ambient temperatures of 125°F to 200°F (52°C to 93°C) are available in many cooling capacities for large and small control panels. NEMA 4X (IP66) Cabinet Coolers (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve for both the vortex tube and cabinet air exhaust. A NEMA 4X Cabinet Cooler® System is available with a thermostat control or in a continuous operation system. They are a low cost, reliable way to cool and purge electronic control panels. EXAIR Cabinet Coolers incorporate a vortex tube to produce cold air from compressed air - with no moving parts. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$1,064.00 -
Model 4860SS-ETC240 NEMA 4X 4,000 Btu/hr St. St. Cabinet Cooler w 240V ETCNEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$3,114.00 -
Model 4825-24VDC NEMA 4 1,700 Btu/hr Cabinet Cooler w 24VDC ThermNEMA 4 thermostat control systems increase a Cabinet Cooler's efficiency by only activating when the enclosure heats above a set limit. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 4 (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain NEMA integrity of the enclosure. NEMA 4 (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels.
Learn More$928.00 -
Model HT4880SS NEMA 4X 5,600 Btu/hr St. St. HT Cabinet Cooler w ThermHigh Temperature Cabinet Coolers for ambient temperatures of 125°F to 200°F (52°C to 93°C) are available in many cooling capacities for large and small control panels. NEMA 4X (IP66) Cabinet Cooler® Systems are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). All Cabinet Coolers are UL Listed and CE compliant. NEMA 4X (IP66) Cabinet Coolers (dust-tight, oil-tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure.
Learn More$2,901.00 -
Model 4815-240 NEMA 4 1,000 Btu/hr Cabinet Cooler w 240V ThermNEMA 4 thermostat control systems increase a Cabinet Cooler's efficiency by only activating when the enclosure heats above a set limit. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout. NEMA 4 (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain NEMA integrity of the enclosure. NEMA 4 (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels.
Learn More$910.00 -
Model 4808SS-ETC240 NEMA 4X 550 Btu/hr St. St. Cabinet Cooler w 240V ETCNEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$1,800.00 -
Model 4870SS-316-240 NEMA 4X 4,800 Btu/hr 316 St. St. Cabinet Cooler w 240V ThermNEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$3,873.00 -
Model 4840SS-240 NEMA 4X 2,800 Btu/hr St. St. Cabinet Cooler w 240V ThermNEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$1,361.00 -
Model 4840SS-316-24VDC NEMA 4X 2,800 Btu/hr 316 St. St. Cabinet Cooler w 24VDC ThermNEMA 4X (IP66) Cabinet Cooler® Systems (dust-tight, oil-tight, splash resistant, corrosion resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure. NEMA 4X (IP66) Cabinet Coolers are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). NEMA 4X (IP66) Cabinet Coolers are available in many cooling capacities for large and small control panels. All Cabinet Coolers are UL Listed and CE compliant.They are a low cost, reliable way to cool and purge electronic control panels. The compact Cabinet Cooler can be installed in minutes through a standard electrical knockout.
Learn More$1,956.00 -
Model HT4840SS-24VDC NEMA 4X 2,800 Btu/hr St. St. HT Cabinet Cooler w 24VDC ThermHigh Temperature Cabinet Coolers for ambient temperatures of 125°F to 200°F (52°C to 93°C) are available in many cooling capacities for large and small control panels. NEMA 4X (IP66) Cabinet Cooler® Systems are constructed of stainless steel for food service and corrosive environments. NEMA 4X thermostat control systems are the most efficient way to operate a Cabinet Cooler. The standard thermostat control systems include an adjustable thermostat factory set at 95°F (35°C). All Cabinet Coolers are UL Listed and CE compliant. NEMA 4X (IP66) Cabinet Coolers (dust-tight, oil-tight, splash resistant, indoor/outdoor service) incorporate a low pressure relief valve which closes and seals when the cooler is not operating to maintain the integrity of a NEMA 4 enclosure.
Learn More$1,474.00
