Cooling Robot Motor Housings
A company manufactures industrial robots. When in operation, the inside of the robot motor housing gets very warm, and needs to be cooled to prevent shutdown. A Model 3202 Vortex Tube with Model 3905 Cold Muffler provided enough cold air volume to keep the motor housing cool and the motor functional, as well as kept the noise down at a safe level.
-
Model 3620 Viton O-Ring (Medium Vortex Tube with brass Generator)
Viton O-Ring for medium Vortex Tubes
Learn More$4.00 -
Model 3906 Cold Muffler 50-150 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$113.00
-
Model 3808 Mini Cooler System, One Cold OutletEXAIR's Mini Cooler produces a stream of 20°F (-7°C) cold air to prevent heat build-up. The Mini Cooler is particularly effective on high speed operations to prevent burning, melting and heat related breakage. Learn More$386.00
-
Model 5904 Single Point Hose Kit for Mini CoolerFlexible Single Point Hose Kit, recommended when heat is generated over a smaller surface area. Single Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$27.00
-
Model 5905 Dual Point Hose Kit for Mini CoolerFlexible Dual Point Hose Kit, recommended when heat is generated over a larger surface area. Dual Point Hose Kits include cone and flat fan nozzles for aiming the cold air flow and are approximately 6" long. Learn More$36.00
-
Model 3998 Cooling Kit (Up to 10,200 Btu/hr.)
This kit includes the large Vortex Tube and all interchangeable generator sets for cooling rates up to 10,200 Btu/hr (2,570 kcal/hr.) The filter, cold air muffler, hose and clips are also included. Vortex Tubes convert an ordinary supply of compressed air into two streams; one hot and one cold. Applications include cooling hot melts, cutting tools, welding horns, electronic controls, soldered parts and gas samples. Temperatures adjustable from -50°F to +250°F.
Learn More$1,785.00 -
Model 3275 Vortex Tube (75 SCFM)EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Learn More$1,206.00
-
Model 3475 Vortex Tube (75 SCFM)EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Learn More$1,206.00
-
Model 3903 Hot Muffler for 2-40 SCFMNoise Muffling: EXAIR offers mufflers for both the hot and cold air discharge. Normally, muffling is not required if the cold air is ducted. Learn More$39.00
-
Model 8-C Generator for Small Vortex Tubes (8 SCFM)Generators set the total volume of air flow through the Vortex Tube and are available to create the coldest temperature possible or the best Btu/hr. values. Learn More$24.00
-
Model 100-C Generator for Large Vortex Tubes (100 SCFM)Generators set the total volume of air flow through the Vortex Tube and are available to create the coldest temperature possible or the best Btu/hr. values. Learn More$73.00
-
Model 3230 Vortex Tube (30 SCFM)EXAIR's Vortex Tubes offer a low cost, reliable, maintenance free solution to a variety of industrial spot cooling problems. Using an ordinary supply of compressed air as a power source, vortex tubes create two streams of air, one hot and one cold, with no moving parts. They are constructed of wear resistant stainless steel, which is ideal for corrosive and hygienic environments. Learn More$262.00