Dual Outlet High Power Cold Gun Replaces Oil Based Coolant
This customer was using an oil based coolant to machine aluminum plate on a vertical CNC machining center. The coolant was very messy and costly. By replacing this coolant system with a Dual Outlet High Power Cold Gun Aircoolant System they eliminated the cost of the coolant, as well the maintenance cost on the coolant pumps.
-
Model 5030 High Power Cold Gun OnlyThe Cold Gun Only (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. The Cold Gun Only is shipped without the hose kit or filter/separator which is included in other Cold Gun Systems. Learn More$421.00 -
Model 5230 High Power Cold Gun System (One Cold Outlet)The Cold Gun Aircoolant System (available in standard or high power versions) produces a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible single point hose assembly and drain filter separator. Learn More$580.00 -
Model 5330 High Power Cold Gun System (Two Cold Outlets)The Cold Gun Aircoolant System with two cold outlets surrounds a part to be cooled with a stream of clean, cold air at 50°F (28°C) below supply air temperature. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used. Systems include the Cold Gun, flexible dual point hose assembly and filter separator. Learn More$595.00