E-Vac Prevents Skunked Beer At The Keg Tap
After filling kegs with beer, there is a small amount of liquid that becomes trapped outside of the pressurized area, which becomes "skunked" (release of a sulfur compound when the hops in the beer is exposed to light.) Our customer made a keg filling machine, and wanted to add a device to remove as much of the excess beer as possible. They installed a Model 800002 Low Vacuum In-Line E-Vac to suction up the excess beer and port it to a drain.
-
Model 800002 2.1 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level.
Learn More$104.00 -
Model 800003 3.1 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level.
Learn More$104.00 -
Model 800005 5.4 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level.
Learn More$155.00