E-Vac Used To Quickly Drain Engine Oil From Crankcase
This customer performs mobile oil changes on their customers' vehicles. They replace the drain plug with a special quick connect fitting. Then, by using a wand with the mating half of the quick connection, they can drain the oil without getting under the vehicle. The level of the drain, however, is not high enough for the oil to drain by gravity feed. Using a Model 800002 In-Line E-Vac mounted to the top of a five gallon bucket, they are able to vacuum the oil into the bucket quickly and easily.
-
Model 800002 2.1 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level.
Learn More$104.00 -
Model 800003 3.1 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level.
Learn More$104.00 -
Model 800005 5.4 SCFM E-Vac Low Vacuum Generator (Porous)EXAIR's In-Line E-Vacs produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials such as cardboard, textiles or delicate materials. There are 7 In-Line models that vary by flow and vacuum level.
Learn More$155.00