E-Vac Used To Quickly Drain Engine Oil From Crankcase
This customer performs mobile oil changes on their customers' vehicles. They replace the drain plug with a special quick connect fitting. Then, by using a wand with the mating half of the quick connection, they can drain the oil without getting under the vehicle. The level of the drain, however, is not high enough for the oil to drain by gravity feed. Using a Model 800002 In-Line E-Vac mounted to the top of a five gallon bucket, they are able to vacuum the oil into the bucket quickly and easily.
-
Model 900804 1/4 NPT E-Vac Check ValveA vacuum check valve holds the vacuum in case of compressed air loss. E-Vac Check Valves are available in 1/4 FNPT, 3/8 FNPT and 1/2 FNPT Learn More$41.00
-
Model 800002M 2.1 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$139.00 -
Model 800002H 2.1 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$126.00 -
Model 800005H 5.4 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$179.00 -
Model 800008H 8.4 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$207.00 -
Model 800013H 12.6 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$269.00 -
Model 800017M 16.8 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$446.00 -
Model 800008M 8.4 SCFM E-Vac Low Vacuum Generator with Straight Through Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$223.00 -
Model 800003H 3.1 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$126.00 -
Model 800017H 16.8 SCFM E-Vac Low Vacuum Generator with Standard Muffler (Porous)
EXAIR's In-Line E-Vacs with Mufflers include sound reducing mufflers that are designed to significantly lower noise without affecting the E-Vac's performance. In-Line E-Vacs are engineered to produce instantaneous vacuum at the point-of-use. These single stage, cylindrical units are compact and easy to mount. Low vacuum units up to 21" Hg (71 kPa) with vacuum flows up to 18.5 SCFM (524 SLPM) are typically used for porous materials
Learn More$410.00